DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2860n and ever decreasing VDSL sync speeds
- marjohn56
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 84
- Thank yous received: 0
03 Nov 2014 17:27 #81648
by marjohn56
Replied by marjohn56 on topic Re: 2860n and ever decreasing VDSL sync speeds
So the UK did not post the vector version of the 3.7.4.3 update, confusing!
Ok, I have now got that version and will run it tonight to see what happens. Cannot make my sync any worse I am currently down to 43Mbps.
I'll leave the other other beta until I have tested this for a few days.
Ok, I have now got that version and will run it tonight to see what happens. Cannot make my sync any worse I am currently down to 43Mbps.
I'll leave the other other beta until I have tested this for a few days.
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank yous received: 0
03 Nov 2014 17:48 #81649
by babis3g
i think no there is not vector in UK site
Try the steps above according how dlm works give a reboot after 1-3 days (assuming dlm will find better stable connection by time) if dlm not kick you before
Replied by babis3g on topic Re: 2860n and ever decreasing VDSL sync speeds
So the UK did not post the vector version of the 3.7.4.3 update, confusing!marjohn56 wrote:
Ok, I have now got that version and will run it tonight to see what happens. Cannot make my sync any worse I am currently down to 43Mbps.
I'll leave the other other beta until I have tested this for a few days.
i think no there is not vector in UK site
Try the steps above according how dlm works give a reboot after 1-3 days (assuming dlm will find better stable connection by time) if dlm not kick you before
Please Log in or Create an account to join the conversation.
- tribz
- Offline
- Junior Member
Less
More
- Posts: 10
- Thank yous received: 0
06 Nov 2014 09:08 #81672
by tribz
Replied by tribz on topic Re: 2860n and ever decreasing VDSL sync speeds
Do you know if noise cancellation is enabled by default or does it have to be set via telnet. I've been using that beta for a few days with no problems and no disconnects. It synced at the same speeds as the official vectoring firmware.
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank yous received: 0
06 Nov 2014 09:32 #81673
by babis3g
Replied by babis3g on topic Re: 2860n and ever decreasing VDSL sync speeds
i am not sure because i dont have the 2860 for testing the beta ( i have the 2760 which are all same modem codes & chipsets) ... you can check few commands here that may helps but if you have no issues i suggest to leave it alone as it is
http://www.forum.draytek.co.uk/viewtopic.php?f=2&t=19713#p81488
check the modem codes, perhaps are both the same modem codes, at wan > general setup > dsl modem code there is one more if you want to try which may be better but if is working good leave it as it is
perhaps the command vdsl opt g.vector ? will show
check the modem codes, perhaps are both the same modem codes, at wan > general setup > dsl modem code there is one more if you want to try which may be better but if is working good leave it as it is
perhaps the command vdsl opt g.vector ?
Please Log in or Create an account to join the conversation.
- tribz
- Offline
- Junior Member
Less
More
- Posts: 10
- Thank yous received: 0
06 Nov 2014 09:37 #81675
by tribz
Replied by tribz on topic Re: 2860n and ever decreasing VDSL sync speeds
> vdsl opt g.vector ?
% vdsl optn g.vector [ on | off]
% Current g.vector feature: ON
% vdsl optn g.vector [ on | off]
% Current g.vector feature: ON
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank yous received: 0
06 Nov 2014 09:41 #81677
by babis3g
Replied by babis3g on topic Re: 2860n and ever decreasing VDSL sync speeds
thanks, then if you have the beta from the Turkish FTP is the vectoring one
Please Log in or Create an account to join the conversation.
Moderators: Chris
Copyright © 2025 DrayTek