VigorSwitch G2282x

Expired

Overview

Key Features & Benefits

High Speed 10 Gigabit SFP+ Uplinks

4 SFP+ ports allows your network to utilise 10Gbps ports to link Switches, Servers and Networked Storage with more bandwidth. This helps you reduce the risk of bottlenecks occurring in your network.

Benefits: Easily increase network throughput and meet demanding bandwidth requirements.

Great Security Features

Protect your network against unauthorised access and network problems with 802.1X port authentication, DHCP Snooping, IP Source Guard and Access Control Lists. Check the features sections for more information.

Benefits: Secure & control access to your network.

Voice VLAN & Surveillance VLAN

Automatically assign VLANs and QoS configuration to devices with matching MAC address OUI upon connection to the switch.

Benefits: Reduce broadcast traffic and allow more control when implementing security policies.

Advanced Layer 2+ Routing Features

Expand your network with support for Layer 3 features such as Static Routes and VLAN Routing, to connect separate networks through the VigorSwitch.

Benefits: Provides a fast and secure bridge between networks.

Manage Centrally or Stand-Alone

Configure and monitor the switch through the VigorACS cloud management platform, DrayTek's Central Switch Management for Vigor routers, or directly via the device's Web Interface.

Benefits: Saves time and money. Easily provision, monitor and manage remote sites without on-site IT or dedicated staff.

IP Conflict Prevention

Use DrayTek's IP Conflict Prevention wizard to lock in the network setup, protecting against ARP spoofing and unknown DHCP servers.

Benefits: Improves network security. Quickly and easily determine the cause of network issues if they occur.

VigorSwitch G2282x

L2+ Managed 24-Port Gigabit Switch with 4 x 10GbE SFP+ Ports and Power Redundancy

The VigorSwitch 2282x Series is a feature rich, high performance, L2+ managed Gigabit Ethernet switch with 24 1-Gigabit RJ-45 LAN ports and 4 10-Gigabit Ethernet SFP+ ports. Use the SFP+ interfaces for high-speed uplinks between switches, servers and network attached storage devices at up to 10Gbps per port.

Our cutting-edge networking switch with power redundancy options allows seamless operation and minimized downtime. This versatile switch comes equipped with both DC and AC power options, providing ultimate flexibility to cater to your unique power requirements.

The switch is also equipped with advanced management features, including VLAN support, QoS prioritization, and remote monitoring, making it ideal for use in small to medium-sized businesses and enterprise environments.

Features

Layer 2+ VLAN Routing

Use the VigorSwitch to link multiple subnets with with Static Routes and VLAN Routing.

QoS (Quality of Service)

Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.

Auto Surveillance VLAN

Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.

IP Conflict Prevention

Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host.

Access Control

VigorSwitch G2282x supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter.

Rack Mountable & Silent

Includes rack mount fittings to fit in any 19" rack with 1u height. Quiet in operation.

10GbE SFP+ Ports

4 SFP+ ports provide fast, high bandwidth uplinks to Fibre, Switches, Servers & Network Attached Storage.

IPv6 Ready

VigorSwitch G2282x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.

ONVIF IP Camera Management

Manage and view ONVIF capable cameras, automatically detecting their topology on the network.

Central Switch Management

Set up VLAN easily from the router and get a centralized hierarchy view of the switches.

Energy-Efficient Ethernet

Compliant with IEEE 802.3az to reduce power consumption.

Hardware Monitoring

Monitor switch temperature and status remotely. Email alerts for power and overheating issues.

10GbE SFP+ Ports for High Speed Uplinks

The DrayTek VigorSwitch G2282x has 4 dedicated SFP+ ports for uplinks, each operating at up to 10 Gigabits per second. The faster 10 Gigabit uplink capability allows you to make high bandwidth links to Network Attached Storage, Servers and other switches, to help reduce the risk of bottlenecks occurring within your network.

The SFP+ ports provide compatibility with your choice of SFP / SFP+ modules (not included) and therefore the most appropriate medium for your application.

Connect a passive Direct Attach SFP+ cable such as the DrayTek DAC-CX10-01M to the SFP+ module port of 1Gbps/10Gbps capable Network Attached Storage, Servers and Switches, for a cost effective, up to 10Gbps network link.

Advanced Layer 2+ Routing Features

A DrayTek VigorSwitch provides connectivity for multiple network segments with 802.1Q VLAN tags, which separate networks at Layer 2 (MAC level). In a typical network that uses Layer 2 VLAN tags, the router provides the routing between VLANs, which can limit throughput between VLANs to the router's Firewall throughput, instead of the 1Gbps link speed.

The VigorSwitch G2282x adds the Layer 3 features VLAN Routing and Static Route to allow the switch to provide routing between VLANs at high speed. The VigorSwitch's Access Control List allows for full control of what traffic routes between networks.

Routing beyond the VigorSwitch G2282x, to the Internet and across VPNs is possible with Static Routes. Up to 512 static routes can be configured on the switch.

Quiet Operation & Hardware Monitoring

The VigorSwitch G2282x is passively cooled for quiet operation.

Hardware Monitoring ensures safe and reliable operation with remote status information & alerts. Track and graph switch temperature and voltage status. View this information locally through the web interface or remotely through VigorACS central management.

This allows the switch to notify you if the switch's temperature exceeds its operating limit. For instance sending an email alert if the switch overheats for any reason.

Quality of Service & Bandwidth Control

Quality of Service

Prioritise latency-sensitive applications on your network with Quality of Service (802.1p and DSCP) support.

Auto Voice VLAN allows the switch to automatically assign VoIP devices to a separate VLAN and prioritise their traffic.

Control throughput per-port with Rate Limiting and application specific Traffic Shaping.

Network Security and Management Features

Stay in control of what's connected to your network with Port Security and 802.1X & MAC authentication, to prevent connection of unauthorised equipment.

Protect against network issues arising from connection of unwanted devices with DHCP Snooping and IP Source Guard.

Control port access for every port on your network with the VigorSwitch Access Control List - to specifically allow or deny specified traffic types moving between ports, just like a Firewall.

AAA - 802.1X Authentication	Control access to LAN ports through a RADIUS server, which could be provided by the Vigor 2862 router on site. Authenticate and authorise network access via 802.1X, MAC address or web authentication. Track data and time usage of each user authenticated with RADIUS Accounting. Solution Focus - Wired 802.1X LAN Port Security
Management Authentication via RADIUS, TACACS+ or local accounts	Control logins to the switch management with the switch's internal user accounts or through a central RADIUS / TACACS+ server.
IPv6 Ready	The VigorSwitch G2282x has extensive IPv6 support, with IPv6 ACL, MLD Snooping and IPv6 DNS Resolution. Filter IPv6 packets with the Access Control List (ACL) alongside IPv4 traffic. Use IPv6 MLD Snooping to control and more efficiently manage Multicast packets in the same way that IGMP Snooping would for IPv4 Multicast packets.
Voice VLAN & Surveillance (IP Camera) VLAN	Automatically assign VLANs and QoS configuration to devices with matching MAC address OUI (manufacturer identifier i.e. 00-1D-AA-00-11-22 = DrayTek) upon connection to the switch.
DHCP Snooping	Limit DHCP server responses to only a specified port to stop unauthorised devices from affecting network connectivity.
IP Source Guard	Protects against address spoofing by comparing packets received with either statically configured source IP addresses or addresses learned from DHCP snooping.
Access Control List	Similar to a firewall, the ACL can control which packet types (IPv4, IPv6 & MAC) are allowed to pass between ports on the switch.
Link Aggregation - Port Trunking	Use two or more network links to connect the VigorSwitch G2282x and another switch / server. Traffic can be shared between the two ports, effectively doubling the bandwidth of the uplink and providing resilience should one of the links fail.
Improved Jumbo Frame	The VigorSwitch G2282x supports Ethernet packets up to 12 Kilobytes in size, to further improve throughput and increase the efficiency of packet transmission across your network.
sFlow	Send sFlow data from the VigorSwitch G2282x to an sFlow Collector to analyse traffic passing through the switch.

ONVIF IP Camera Management

The VigorSwitch G2282x is able to discover and manage ONVIF (Open Network Video Interface Forum) compatible IP cameras and NVR systems, allowing for easy discovery and management of your IP cameras on the network.

Simply connect ONVIF capable devices to the VigorSwitch G2282x, then Discover devices, the VigorSwitch determines the network topology of connected cameras & NVR systems. The switch can aid in the maintenance of an IP camera network, with port throughput overusage notifications and the Device Ping Check, to notify if connected IP cameras stop responding.

Through the VigorSwitch web interface, you can view the video feed of discovered and authenticated IP cameras, check firmware and device information, and modify the IP address settings of connected ONVIF devices.

Camera Management - Topology view

The ONVIF Topology automatically determines where IP cameras and NVR systems are connected into your network, summarising the network status of each and any Power over Ethernet issues that may be detected:

ONVIF Camera Management - Topology view

Central Management

The DrayTek VigorSwitch G2282x can operate in standalone mode and be managed through its web interface or, if you need to manage and monitor the switch remotely, or have several DrayTek VigorSwitches to administer, you can centrally manage and monitor them either with:

A DrayTek router which supports switch management
(connected directly to the switch)

and / or
DrayTek's VigorACS management platform

Managing a VigorSwitch through VigorACS

DrayTek's VigorACS central management system provides a centralised way to manage and view the status of any DrayTek Vigor router, VigorAP access point and VigorSwitch connected to the VigorACS server.

DrayTek VigorSwitch switches that support TR-069 management can be managed through DrayTek VigorACS 2 in the same way that a DrayTek Vigor router or VigorAP access point would be managed. Through VigorACS, you can view and manage; a single VigorSwitch, all switches on a site or all switches across an entire network spanning multiple sites in one place.

DrayTek VigorSwitches connected to VigorACS connect directly to the VigorACS server to be managed, the router or network that they are connected to needs no additional configuration beyond the VigorSwitch having access to the Internet (or if your VigorACS server is located across a private WAN / VPN connection, access to that network).

Dashboard view

View the state of a VigorSwitch through the Dashboard, with PoE usage, uptime and connected ports all visible in one place:

Switch Configuration

View the configuration of a VigorSwitch and make changes to the configuration through VigorACS, then copy the settings from that switch to apply them to multiple VigorSwitch switches:

Central Switch Management with a DrayTek Vigor Router

DrayTek Vigor router Central Switch Management provisions and monitors VigorSwitch switches through a DrayTek Vigor router, with profiles that can be applied to multiple switches and VLAN configuration all handled within the router.

Central Switch Management requires firmware support on both the VigorSwitch and the DrayTek Vigor router*
^{*requires 3.9.1 firmware update}

This can simplify the setup of multiple subnets and VLANs, without needing in-depth knowledge of VLAN tagging and reduces setup time, with the time consuming step of configuring VLANs for each port handled by the router instead.

Switch Hierarchy

The Switch Hierarchy view provides a visual overview of interconnections between DrayTek VigorSwitch switches with the devices connected to each LAN port:

Switch Management Profiles

Switch Management profiles can be used configure schedules to enable or disable ports (including PoE) and set bandwidth limits for the ports. Descriptive names can be configured on the router which can be seen from the Switch Hierarchy view:

VLAN configuration of a VigorSwitch can be provisioned from the DrayTek Vigor router, with the router automatically configuring the Uplink port and being aware of the VLAN tags that the Vigor router and the connected LAN port have available:

Energy Efficient Ethernet

The VigorSwitch G2282x supports Energy Efficient Ethernet, to lower the overall power usage of the switch when ports are idle or disconnected.

The IEEE 802.3az standard allows individual Ethernet links to enter a low power state, when not transmitting or not plugged in, drawing less energy than if the ports were to run at full speed at all times.

Rack Mountable & Silent

Install the VigorSwitch on a desk, shelf or wall, or use the included rack mount fittings to install the switch in any standard 19" rack with 1U height.

Ideal for installation in quiet office environments, the VigorSwitch G2282x runs quietly, cooling without a fan.

IP Conflict Prevention

DrayTek's IP Conflict Prevention system is an easy way to ensure that the switch protects against IP conflicts and ARP spoofing. Once configured, the switch monitors and notifies of IP conflicts, giving a visual reference of possible causes for network issues.

The IP Conflict Prevention wizard catalogues the current network layout, giving you the option to fix the IP address and MAC information for important network devices, such as Servers and Routers. If another device attempts to use the IP address, the switch and network will continue to communicate with the correct device instead of the unknown device.

Screenshots

DrayTek VigorSwitch G2282x - Web Interface Screenshots

Dashboard

Dashboard view displays an overview of the VigorSwitch G2282x's port usage and port status:

Advanced Layer 2+ Features - VLAN Routing

Use the VigorSwitch as a gateway between two separate Layer 3 IP subnets with the VLAN Routing facility. Define where traffic is routed to, for access to the Internet gateway with Static Routes:

IP Camera Management of ONVIF IP Cameras

Manage and view the video feed of automatically detected ONVIF IP Cameras connected to the VigorSwitch:

Managing and viewing ONVIF IP cameras through the VigorSwitch

Port Bandwidth Usage

Display live usage data of all ports on the switch, showing the quantity of data transmitted and received on each port, with the percentage displayed along with the port's speed:
i.e. 900mbps would be displayed as 90% usage for a 1Gpbs port
50mbps would be displayed as 50% usage for a 100Mbps port

DrayTek VigorSwitch Port Bandwidth Usage

Dynamic MAC table

View devices connected to each port from the Dynamic MAC table, which displays the known MAC address and their respective VLANs for each port on the switch:

Port Bandwidth Limits

Configure bandwidth limits for each LAN port, with Egress rates controlling a client's download speed from the switch and Ingress rates controlling a client's upload speed to the switch.

VLAN Configuration

Quickly create single or multiple VLAN groups. To create multiple VLANs at once, specify multiple VLAN tags separated by commas, or as a range of VLANs (i.e. 3-5 would create VLANs 3, 4 and 5):

Apply VLAN configurations to multiple ports:

Configuration of SFP+ 10Gbps ports

Set the speed and media type of the SFP+ modules connected to the switch's four SFP+ ports.

Specifications

VigorSwitch G2282x

Product Code	EAN	Product Name	Description
VSG2282x-K	471048474643	VigorSwitch G2282x (UK/IE)	10GbE Gigabit Switch with 24 Gigabit Ports & 4 10GbE SFP+ Uplink Ports and Power Redundancy

Key Specifications

24 x RJ-45 Gigabit Ethernet Ports
4 x SFP+ 10GbE Ports for Uplink / Fibre
802.1q VLANs (Tag, Port & MAC-based)
VLAN Routing & Static Route with DHCP server / relay
Virtual Router Redundancy Protocol
QoS for Application traffic prioritisation
802.1x RADIUS / TACACS+ Port Authentication with Accounting
Voice VLAN for QoS (OUI Mode)
Access Control List (ACL)
Port Mirroring & Link Aggregation
IGMP Snooping/Querier (Up to 256 Multicast Groups)
IPv4 and IPv6 Support
Hardware Monitoring
Centrally managed or standalone operation
Console Port

Technical Specification (UK Hardware Spec.)

Physical Interfaces
- 24 RJ-45 Ethernet Ports – 10/100/1000Mbps
- 4 SFP+ Ports – 1000Mbps/10Gbps
- Console Port (RJ-45 physical, RS-232 electrical)
- Factory Reset Button
- Stacking Scan Button – NEW!
- AC Power Socket
- DC Backup Power Input – NEW!
VLAN
- 802.1q Tag-based VLAN
- Port-based and MAC-based VLANs
- QinQ (Basic)
- GVRP – General VLAN Registration Protocol
- Up to 255 VLANs (out of 4096 VLAN IDs)
- 802.1v Protocol-Based VLAN
- Voice VLAN (OUI Mode)
- Surveillance VLAN (OUI Mode)
- Protocol VLAN
- MAC-based VLAN
- Management VLAN
- Port Isolation
QoS
- Support 8 priority queues
- Port-Based rate control (Ingress & Egress)
- Priority queue schedule (WRR or Strict Priority)
- Rate Limit
- Class of Service
  - 802.1p CoS
  - DSCP
  - CoS-DSCP
  - IP Precedence ToS
Network Security
- IP Source Guard with ARP inspection
- Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
- DoS Attack protection
- AAA Authentication
- MAC Authentication
- Protected Port / Port Isolation
- Static Port Security
- Dynamic ARP Inspection
- DHCP Snooping with Option 82
- Loop Detection & Prevention
- Access Control Lists (ACL)
  - Up to 512 ACL Entries
  - Source and destination MAC
  - VLAN ID
  - IPv4/v6 address
  - Protocol
  - TCP/UDP port
Spanning Tree
- Spanning Tree Protocol (STP)
- Rapid Spanning Tree Protocol (RSTP)
- Multiple Spanning Tree Protocol (MSTP)
Link Aggregation
- Combine multiple ports to increase bandwidth
- 8 Aggregation Groups
- Up to 8 ports in each group
- LACP or Static setup
- Supports traffic load balancing
Networking Performance
- Switching Capacity: 128Gbps
- Forwarding Rate: 95.2Mpps
- MAC Addresses Supported: 16,000
- Jumbo Frames up to 12KB
- Packet Buffer size: 12Mbit
- Layer 3 Routing Table: Up to 500 Entries
Multicast
- Up to 256 multicast groups
- Multicast Group Filtering / Throttling
- IGMP Snooping V2/V3 (BISS)
- IGMP V2/V3 Querier
- Multicast VLAN registration
- MLD Snooping V1/V2
  - Immediate Leave
  - Report Suppression
  - IGMP/MLD Querier
AAA
- RADIUS / TACACS+ Authentication for Management
- Multiple AAA Server
- MAC / Inaccessible Authentication bypass
- RADIUS Authentication 802.1X
  - Accounting
  - Guest VLAN
  - Port based Authorisation
    - 802.1X Single/Multi
    - MAC-based
    - Web-based
  - Attribute Assignment
    - User Privilege
    - VLAN
- TACACS+ Authentication
  - Port Authorisation
  - Accounting
ONVIF Surveillance Management
- Discovery of ONVIF-compliant IP Cameras
- Surveillance Topology
- Real-Time Video Streaming
- ONVIF Device Maintenance
  - Device Information
  - Network Settings Configuration
  - Time Settings
  - Reboot
  - Reset to Factory Default Settings
  - Ping Check with Mail Alert on disconnection
Management
- Web User Interface (HTTP or HTTPS)
- HTTP (non-TLS) can be disabled for increased security
- Command Line Interface (CLI) via SSH/Telnet
- Console Port (RJ45) for CLI management
- Central Management
  - VigorACS
  - VigorConnect
  - Vigor Router Switch Management
    (requires router firmware support)
- Running/Startup/Backup Configuration
- Configuration Backup/Restore
- Factory Default
- System Reboot
- sFlow
- IPv4 & IPv6 Dual-Stack
- Virtual Stacking – Single IP Management ^
- LLDP(802.1ab) + MED
- Firmware Upgrade/Backup by HTTP/HTTPS
- Dual Firmware Image (Active & Backup Firmware)
- OpenVPN Client with Certificate-based auth
- ONVIF – IP Camera Management
- SNMP v1, v2c, v3 (with Generic Traps)
- RMON Groups 1, 2, 3, 9 (History, Statistics, Alarms, Events)
- SNTP (Simple Network Time Protocol)
Diagnostics
- Port Status & Usage display
- CPU/RAM Usage display
- MAC Address Table
- Device Check
- Syslog
- Mail Alert
  - Port Status
  - Port Speed Change
  - System Restart
  - IP Conflict
  - ONVIF IP Camera Snapshot
- Port Mirroring
- Ping Diagnostics
- Port-based Cable Test
Hardware Monitor
- Remote Monitoring through Web Interface & VigorACS *
- Hardware Monitor Data Recording & Graphing
- Temperature Monitoring
- Voltage Monitoring

Layer 3 Networking Features
- Static Route
- VLAN Routing
IPv4 Features
- DHCP Client
- DNS Client
- DHCP Server
  - Option 82, 66, 67
  - DHCP Relay
  - DHCP Snooping
  - DHCP IP Source Guard
IPv6 Features
- Auto Configuration
- Static IPv6 Address & Prefix Length
- Static IPv6 Default Gateway
- IPv6 Neighbour Discovery (ND)
- IPv6 Duplicate Address Detection
- ICMPv6
- DHCPv6 Client
General IEEE Standards Compliance
- 802.3 10Base-T
- 802.3u 100Base-T
- 802.3ab 1000Base-T
- 802.3ae 10GBase-T
- 802.3x Flow Control Capability
- 802.3 Auto-negotiation
- 802.3ad Port trunk with LACP
- 802.3az Energy Efficient Ethernet
- 802.1q VLAN
- 802.1p Class of Service
- 802.1d Spanning Tree
- 802.1w Rapid Spanning Tree
- 802.1s Multiple Spanning Tree
- 802.1x Port Based Network Access Control
- 802.1ab Link Layer Discovery Protocol (LLDP)
- 802.1ad QinQ
Operating Requirements
- AC Power Input Requirements: 100-240VAC
- AC Power supply: Internal
- Power backup input: DC +12V @ 3A
- Maximum Input Power Consumption: 36 Watts
- Cooling: Passively Cooled
- Operating Temperature: 0 °C to 50 °C
- Storage Temperature: -20 °C to 70 °C
- Operating Humidity: 10% to 90% RH (non-condensing)
- Storage Humidity: 5% to 90% RH (non-condensing)
- BTU per Hour:
  - 122.84 BTU/hr
Physical Specifications
- Dimensions (W x D x H):440 x 205 x 44 mm
- Weight (excluding SFP modules/cables):2.69 kg
- Rack mountable: 1U
  - Brackets included for rack mounting
Box Contents
- VigorSwitch G2282x Network Switch
- UK IEC13 Power Cable
- 1U Rack Mount Fittings
- Console Cable
- Quick Start Guide
ROHS, UKCA & CE Compliant
Warranty
- Standard: Two (2) Year, RTB
- Software security updates:
  3 years after the EOL notification. Please note that this only applies to products sold in the UK
- Optional VigorCare Enhanced Warranty Available
  - VigorCare D3 3 Year Subscription: VCARE-D3
  - VigorCare D5 5 Year Subscription: VCARE-D5

* - VigorACS subscription required. ^ - available in a future firmware release.

Share this link

Overview

Key Features & Benefits

High Speed 10 Gigabit SFP+ Uplinks

Great Security Features

Voice VLAN & Surveillance VLAN

Advanced Layer 2+ Routing Features

Manage Centrally or Stand-Alone

IP Conflict Prevention

VigorSwitch G2282x

L2+ Managed 24-Port Gigabit Switch with 4 x 10GbE SFP+ Ports and Power Redundancy