DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Draytek 2960 Help
- ghostworks
- Offline
- Member
Less
More
- Posts: 354
- Thank you received: 0
08 May 2013 14:25 #76108
by ghostworks
Replied by ghostworks on topic Re: Draytek 2960 Help
It is a shame, I don't even try using any other services on it in case it gets worse.
My 3900 is only doing the basic...
3 WAN's via Vigor 120's
2 VLAN's via physical ports Ether1 and Ether2
Yet CPU is on a average of 55% usage and my network is not that big, it's not like a enterprise network that this is supposed to be designed for
My 3900 is only doing the basic...
3 WAN's via Vigor 120's
2 VLAN's via physical ports Ether1 and Ether2
Yet CPU is on a average of 55% usage and my network is not that big, it's not like a enterprise network that this is supposed to be designed for
Please Log in or Create an account to join the conversation.
- the pit
- Topic Author
- Offline
- Member
Less
More
- Posts: 409
- Thank you received: 0
08 May 2013 21:12 #76115
by the pit
Doesn't fix upnp on the local network though.
Replied by the pit on topic Re: Draytek 2960 Help
Hi, fw v.1.0.6.1 is out! At first sight, previously said that there are many bug fix but no features improvements, i noted a sensible more responsive gui but my PPTP VPN doesnt work anymore! :S i have not phisical access until tonight, i can connect but im not able to navigate on the Net and in LAN too; the ip etc is correct but no way to navigate.Azzola wrote:
ASAP i'll test more but, apart of this problem, i REALLY HOPE not to wait other 6 months to see implemented what should be inside since day 1 or few weeks later, reliability is important but im Still waiting for what is already working on lower end models and i need. By now im not satisfied.
Doesn't fix upnp on the local network though.
Please Log in or Create an account to join the conversation.
- the pit
- Topic Author
- Offline
- Member
Less
More
- Posts: 409
- Thank you received: 0
09 May 2013 19:13 #76134
by the pit
Replied by the pit on topic Re: Draytek 2960 Help
Rolled back to version 1.0.6 as everything ground to a halt with 1.0.6.1 after a few hours and rebooting didn't fix it.
Please Log in or Create an account to join the conversation.
- jireson
- Offline
- Junior Member
Less
More
- Posts: 17
- Thank you received: 0
09 May 2013 19:31 #76136
by jireson
Replied by jireson on topic Re: Draytek 2960 Help
I have just received V2960_106branch_2183 what were you running?
Please Log in or Create an account to join the conversation.
- the pit
- Topic Author
- Offline
- Member
Less
More
- Posts: 409
- Thank you received: 0
09 May 2013 19:35 #76137
by the pit
1.0.6 revision 1568.
I did try a beta version of 1.0.7 which draytek sent me but this killed load balancing once again. I'm not confident that draytek will ever get these 2960 and 3900 working properly.
Replied by the pit on topic Re: Draytek 2960 Help
I have just received V2960_106branch_2183 what were you running?jireson wrote:
1.0.6 revision 1568.
I did try a beta version of 1.0.7 which draytek sent me but this killed load balancing once again. I'm not confident that draytek will ever get these 2960 and 3900 working properly.
Please Log in or Create an account to join the conversation.
- jireson
- Offline
- Junior Member
Less
More
- Posts: 17
- Thank you received: 0
Moderators: Chris, Sami
Copyright © 2024 DrayTek