DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

AP902 WDS Issues with 2762ac

More
29 Sep 2020 21:18 #97293 by hornbyp
Replied by hornbyp on topic Re: AP902 WDS Issues with 2762ac

zimma wrote:
My mistake, sorry it was an AP810


Ah - makes more sense :D

zimma wrote:
In the morning a wireless scan showed the AP902's wifi was actually running on the wrong channel. The 5GHz channel in the 2762 and the 902 are fixed to allow WDS to work. So obviously when the AP902 switched channel, the WDS link went down.



Could this be due to DFS/Radar Detection? (See here )

I had something similar going on with my AP903/AP802 pair. It was very intermittent (probably due to the offending Radar station being just over the brow of a hill (and ten miles away).

I only found it via SYSLOG - nothing appeared in the Web GUI to indicate why it had switched channels...

Do the 1.3.2 Release Notes happen to mention any related change?

Please Log in or Create an account to join the conversation.

More
01 Oct 2020 07:27 #97316 by zimma
Replied by zimma on topic Re: AP902 WDS Issues with 2762ac
I had considered DFS as it is using a DFS channel.

Nothing in release notes. 1.3.2 has changes to SNMP and web gui.

I've been running 1.3.1 for a few days now and it is solid.

If I get some time I may pop 1.3.2 back on and monitor syslog for any DFS related chatter but for now I'll just stick with 1.3.1.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami