DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

VigorAP 700 - Bricked?

  • sam.thompson
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
01 May 2014 17:11 #79808 by sam.thompson
Replied by sam.thompson on topic Re: VigorAP 700 - Bricked?

babis3g wrote: i thought they will repair it with a reasonable fee if is out of warranty or not proof of receipt
Well try the 30/30/30 reset then try it again if will help you out
Basically holding the reset button for 1 & half minute then each 30 seconds plug unplug the power cord ... (google search it for more accurate instructions, it works almost with every model make)


I'm surprised that I haven't heard of that before, although have performed a similar action to power cycle/recover an SSD. Thanks - I'll give it a go!

Please Log in or Create an account to join the conversation.

  • sam.thompson
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
02 May 2014 09:06 #79813 by sam.thompson
Replied by sam.thompson on topic Re: VigorAP 700 - Bricked?
Alas, no change. Thanks anyway.

Please Log in or Create an account to join the conversation.

More
28 May 2014 12:05 #80156 by tobythetenor
Replied by tobythetenor on topic Re: VigorAP 700 - Bricked?
I just had a bricked 2860n+, and I found that the tftp method only works on Windows XP using the Draytek Firmware update tool.
No luck with tftp client on Mac / Linux or Windows, nor with the Firmware Update Tool on windows 8.1
Good luck to you!

Please Log in or Create an account to join the conversation.

  • sam.thompson
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
28 May 2014 12:09 #80157 by sam.thompson
Replied by sam.thompson on topic Re: VigorAP 700 - Bricked?

tobythetenor wrote: I just had a bricked 2860n+, and I found that the tftp method only works on Windows XP using the Draytek Firmware update tool.
No luck with tftp client on Mac / Linux or Windows, nor with the Firmware Update Tool on windows 8.1
Good luck to you!


Interesting - thanks Toby! I'm sure I've got a couple of old XP laptops somewhere, that I can dig out to give this a try.

Please Log in or Create an account to join the conversation.

More
01 Jun 2014 13:51 #80206 by tobythetenor
Replied by tobythetenor on topic Re: VigorAP 700 - Bricked?
Sam, I would love to know if you've been successful using XP.

Please Log in or Create an account to join the conversation.

  • sam.thompson
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
23 Jun 2014 11:12 #80358 by sam.thompson
Replied by sam.thompson on topic Re: VigorAP 700 - Bricked?

tobythetenor wrote: Sam, I would love to know if you've been successful using XP.


I didn't get round to trying this with XP, but the Draytek firmware tool itself didn't work under Win7Pro. I ended up just buying a new AP700.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami