DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Trouble setting up wan access to internal server

  • bruceread
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
09 Apr 2019 17:37 #94351 by bruceread
Replied by bruceread on topic Re: Trouble setting up wan access to internal server
I'm still not getting anywhere with this. I have spent 3 long calls with DrayTak support who don't seem to know either!

Please Log in or Create an account to join the conversation.

More
11 Apr 2019 19:58 #94365 by mbames
Replied by mbames on topic Re: Trouble setting up wan access to internal server
Reset it to factory specs and try again.

Then go to NAT | Open ports.
Select Index 1
Enable Open Ports
Add a Comment
WAN interface: (most likely 1)
Source IP: Any
Private IP: 192.168.1.111

1. Protocol: TCP
1. Start Port: 8000
1. End Port: 8001

Hit OK.

Please Log in or Create an account to join the conversation.

  • bruceread
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
11 Apr 2019 22:10 #94368 by bruceread
Replied by bruceread on topic Re: Trouble setting up wan access to internal server
Hi,

I have tried factory reset.

I dont have the path you suggest. Under NAT I have -
Port Redirection
Fast NAT
Server Load Balance
DMZ Host
ALG
Connection Timeout

Please Log in or Create an account to join the conversation.

Moderators: Chris