DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 130 Low Sync Speed

  • highpriest
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
27 May 2016 11:01 #86187 by highpriest
Replied by highpriest on topic Re: Vigor 130 Low Sync Speed
Didn't save the output, too late now :)

Switched back to the HH5; will leave it running for a week to see if the speed recovers back to my usual 79999.

Please Log in or Create an account to join the conversation.

  • highpriest
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
27 May 2016 11:09 #86188 by highpriest
Replied by highpriest on topic Re: Vigor 130 Low Sync Speed
Still stuck at 74000 according to the HH5.

Code:
1. Product Name: HomeHub5 2. Serial number: +076284+1418005732 3. Firmware version: v0.07.05.0A13-BT (Type B) Last updated 9/12/2015 4. Board version: 01 5. VDSL uptime: 1 days, 10:11:58 6. Data Rate: 19999 / 74000 7. Maximum Data Rate: 25627 / 92329 8. Noise Margin: 12.6 / 10.8 9. Line Attenuation: 13.8 / 14.2 10. Signal Attenuation: 0.0 / 0.0 11. Data sent/received: 168.2 MB / 4.0 GB 12. Broadband username: bthomehub@btbroadband.com

A BT (OpenReach) speed test confirmed that my IP profile has been set to 71.55.

Code:
Download speed achieved during the test was - 69.56 Mbps For your connection, the acceptable range of speeds is 40 Mbps-71.55 Mbps. Additional Information: IP Profile for your line is - 71.55 Mbps

So using the Vigor 130 for just 3 days had an appreciable impact on my line. Odd.

Please Log in or Create an account to join the conversation.

  • highpriest
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
27 May 2016 11:11 #86189 by highpriest
Replied by highpriest on topic Re: Vigor 130 Low Sync Speed
Such a shame really. I so wanted this to work properly. Might have to dust off my old HG612 just so I can get rid of the HH5!

Please Log in or Create an account to join the conversation.

More
29 May 2016 18:11 #86211 by adrianh54
Replied by adrianh54 on topic Re: Vigor 130 Low Sync Speed

highpriest wrote: Such a shame really. I so wanted this to work properly. Might have to dust off my old HG612 just so I can get rid of the HH5!



The answer is right there in front of you .

>>>> Download speed achieved during the test was - 69.56 Mbps <<<<

>>> IP Profile for your line is - 71.55 Mbps <<<<



Your line profile is 71.55Mbps , to get a speedtest result of 69.56Mbps is amazingly good , it is absolutely impossible to get anything higher, your speed can't be greater than the IP profile.

Your line IP profile may be lower than before because of interleaving or .INP , that is why we need to see a full set of stats.

Repeatedly breaking the connection will only result in your synch dropping further as the DSLAM will be reset by DLM.

Please Log in or Create an account to join the conversation.

  • highpriest
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
30 May 2016 20:22 #86218 by highpriest
Replied by highpriest on topic Re: Vigor 130 Low Sync Speed

AdrianH54 wrote: Your line profile is 71.55Mbps , to get a speedtest result of 69.56Mbps is amazingly good , it is absolutely impossible to get anything higher, your speed can't be greater than the IP profile.


My line has been syncing at 79999 Kbps for over 4 years. Just using the Vigor 130 for 2-3 days brought it down to 74000. DLM lowered my IP profile to improve my line's "stability".

Your line IP profile may be lower than before because of interleaving or .INP , that is why we need to see a full set of stats.


I'm on Fastpath. Only 100 meters or so from the cab. Line is noise free and capable of syncing at the full speed.

Repeatedly breaking the connection will only result in your synch dropping further as the DSLAM will be reset by DLM.


I wasn't the one doing it, the 130 was. The line reset 8 or 9 times in the (roughly) 3 days that it was connected which caused DLM to kick in. The modem was plugged in, and left undisturbed.

Please Log in or Create an account to join the conversation.

More
30 May 2016 20:36 #86220 by adrianh54
Replied by adrianh54 on topic Re: Vigor 130 Low Sync Speed
Have you flashed the latest firmware?

The early firmware had issues with disconnections like that and caused the DLM to react.

Please Log in or Create an account to join the conversation.

Moderators: Chris