DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2960 and Firmware 1.1
- the pit
- Offline
- Member
Less
More
- Posts: 409
- Thank you received: 0
16 Sep 2015 19:59 #84373
by the pit
Replied by the pit on topic Re: 2960 and Firmware 1.1
Just tried the latest version back to 1.0.9.1 which works fine. Got to admit I didn't do the reset and then load the files back on as I don't think it would make any difference.
Please Log in or Create an account to join the conversation.
- the pit
- Offline
- Member
Less
More
- Posts: 409
- Thank you received: 0
17 Sep 2015 19:58 #84383
by the pit
Replied by the pit on topic Re: 2960 and Firmware 1.1
Up and running
Okay reset the router to defaults
then flashed the firmware
rebooted and reloaded the original config
rebooted
No udp access to camera's and then after five minutes they came back up. Earlier versions of the firmware didn't have this slow response.
Okay reset the router to defaults
then flashed the firmware
rebooted and reloaded the original config
rebooted
No udp access to camera's and then after five minutes they came back up. Earlier versions of the firmware didn't have this slow response.
Please Log in or Create an account to join the conversation.
- ateece
- Offline
- New Member
Less
More
- Posts: 9
- Thank you received: 0
17 Sep 2015 22:43 #84388
by ateece
Replied by ateece on topic Re: 2960 and Firmware 1.1
I can confirm an identical problem on 3900 too.
On this model the existing port forwarding rules don't work, and new ones won't enable. I tick the box, press Ok. It says the update was successful but the rule stays disabled.
On this model the existing port forwarding rules don't work, and new ones won't enable. I tick the box, press Ok. It says the update was successful but the rule stays disabled.
Please Log in or Create an account to join the conversation.
- cityboy
- Offline
- New Member
Less
More
- Posts: 5
- Thank you received: 0
03 Oct 2015 15:48 #84475
by cityboy
Replied by cityboy on topic Re: 2960 and Firmware 1.1
I uploaded my 2960 with latest firmware 1.1.02 .
My NAT port redirects are now not working.
Where do I get the older software from to back this out?
My NAT port redirects are now not working.
Where do I get the older software from to back this out?
Please Log in or Create an account to join the conversation.
- dgarratt
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 68
- Thank you received: 0
- the pit
- Offline
- Member
Less
More
- Posts: 409
- Thank you received: 0
04 Oct 2015 18:53 #84481
by the pit
Replied by the pit on topic Re: 2960 and Firmware 1.1
My is working fine now but you have to set it too defaults after flashing and then reload your configuration.
Don't ask we why that fixes it but it does.
Don't ask we why that fixes it but it does.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek