DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2960 and Firmware 1.1
- dgarratt
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 68
- Thank you received: 0
06 Aug 2015 14:58 #84050
by dgarratt
Replied by dgarratt on topic Re: 2960 and Firmware 1.1
I see there is a version 1.1.0.1 on draytek.com - is this one the same as you tested ?
Please Log in or Create an account to join the conversation.
- the pit
- Offline
- Member
Less
More
- Posts: 409
- Thank you received: 0
24 Aug 2015 18:43 #84195
by the pit
Replied by the pit on topic Re: 2960 and Firmware 1.1
Yes and it doesn't work as someone else has found out. Draytek have taken my config files and say that it does. So perhaps it's also a problem with a revision of the chipset.
Please Log in or Create an account to join the conversation.
- dgarratt
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 68
- Thank you received: 0
26 Aug 2015 14:01 #84213
by dgarratt
Replied by dgarratt on topic Re: 2960 and Firmware 1.1
When I described the problem I was experiencing with plug and play they said they could not replicate that either, but on further investigation they were doing something completely different. I was having a problem with a ftp server and they were just testing http port 80 redirection. Anyway if you make any progress I would be interested to know. I'm sticking on the previous release for now.
Dave
Dave
Please Log in or Create an account to join the conversation.
- the pit
- Offline
- Member
Less
More
- Posts: 409
- Thank you received: 0
27 Aug 2015 20:49 #84229
by the pit
Replied by the pit on topic Re: 2960 and Firmware 1.1
Well I could backup and the config files reset the router then upgrade and then load reload the rules. At the moment I haven't the time to do this in case it goes wrong.
Please Log in or Create an account to join the conversation.
- dgarratt
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 68
- Thank you received: 0
14 Sep 2015 12:01 #84349
by dgarratt
Replied by dgarratt on topic Re: 2960 and Firmware 1.1
I see there is a 1.1.0.2 available for download and despite UK technical support telling me that they could not replicate the problem there is a note in the release documentation as follows :-
? Fixed:Port Redirection didn't work for specific configuration.
? Fixed:Port Redirection didn't work for specific configuration.
Please Log in or Create an account to join the conversation.
- the pit
- Offline
- Member
Less
More
- Posts: 409
- Thank you received: 0
14 Sep 2015 20:33 #84352
by the pit
Replied by the pit on topic Re: 2960 and Firmware 1.1
Noticed that but haven't had time to try it. Will have to wait until I'm less busy.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek