DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2860 VSDL stats - Error correction rates

  • andyhamp
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
21 Jul 2014 13:40 #80741 by andyhamp
Replied by andyhamp on topic Re: 2860 VSDL stats - Error correction rates

babis3g wrote: the command you have (wan vdsl show basic) ... is not command for errors for any model as far i know, but even if it has errors the command its self it says wan info BASIC

the above command in my opinion has enough info compare to some other adsl/vdsl modems

you can also try vdsl wan (should give you available option, or vdsl internet, vdsl srv, vdsl optn, vdsl mngt ... i also think for commands is rich



I'm sorry but you are obviously unfamiliar with the 2860 device ... other Draytek devices (profressional grade ones at least), have suitable commands the 2860 does not... the BASIC command is the ONLY option the firmware gives.

Code:
> wan vdsl show VDSL Show Status wan vdsl show [basic] : Display VDSL Status


the vdsl commands don't even exist ....

Code:
> vdsl status % Command missing, Valid commands are: adsl bpa csm ddns dos exit internet ip ip6 ipf log ldap mngt msubnet object port portmaptime prn qos quit show srv switch sys testmail fs upnp usb vigbrg vlan vpn wan wptl wol user nand apm


the comands i have show are the best i can find ...

Code:
> adsl status --------------------------- ATU-R Info (hw: annex A, f/w: annex Unknown) ----------- Running Mode : unknown State : SHOWTIME DS Actual Rate : 50420000 bps US Actual Rate : 20000000 bps DS Attainable Rate : 0 bps US Attainable Rate : 0 bps DS Path Mode : Fast US Path Mode : Fast DS Interleave Depth : 0 US Interleave Depth : 0 NE Current Attenuation : 17 dB Cur SNR Margin : 6 dB DS actual PSD : 7. 5 dB US actual PSD : 12. 6 dB ADSL Firmware Version : 05-04-08-00-00-06 -------------------------------- ATU-C Info --------------------------------- Far Current Attenuation : 0 dB Far SNR Margin : 6 dB CO ITU Version[0] : 00004d43 CO ITU Version[1] : 000015a4 DSLAM CHIPSET VENDOR : < unknown > > > wan vdsl show basic VDSL2 Link Status: SHOWTIME Firmware Version: 05-04-08-00-00-06 VDSL2 Profile: 17A Basic Status Upstream Downstream Unit Actual Data Rate: 20000 50420 Kb/s SNR: 5 17 0.1dB

Please Log in or Create an account to join the conversation.

More
21 Jul 2014 13:46 #80742 by babis3g
Replied by babis3g on topic Re: 2860 VSDL stats - Error correction rates
if you type vdsl show (not wan vdsl show) what is appearing, thanks
EDIT
what firmware have you got? even i don't have the 2860 (looking to get it soon) it seems are missing few commands but i could be wrong

Please Log in or Create an account to join the conversation.

  • andyhamp
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
21 Jul 2014 14:15 #80745 by andyhamp
Replied by andyhamp on topic Re: 2860 VSDL stats - Error correction rates
See my previous post ... there are no vsdl commands ...

Code:
> vdsl status % Command missing, Valid commands are: adsl bpa csm ddns dos exit internet ip ip6 ipf log ldap mngt msubnet object port portmaptime prn qos quit show srv switch sys testmail fs upnp usb vigbrg vlan vpn wan wptl wol user nand apm

Please Log in or Create an account to join the conversation.

More
21 Jul 2014 15:15 #80747 by babis3g
Replied by babis3g on topic Re: 2860 VSDL stats - Error correction rates
It impossible to Not have any vdsl support commands ... all dray OS should have under show vdsl or vdsl show or vdsl status the page ... if is not then it is poor indeed ... unless you have old firmware as mentioned ... Any way, Thanks for your time and your report, its also helpfull for me as i am looking to get one for my collection :) i could be wrong as i am not owner of a 2860

Please Log in or Create an account to join the conversation.

  • andyhamp
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
21 Jul 2014 17:17 #80748 by andyhamp
Replied by andyhamp on topic Re: 2860 VSDL stats - Error correction rates
it's not impossible .... it's fact ... and i'm running the latest firmware.

they simply haven't chosen not to implement this functionality. As i have said previously it's not a true commercial grade router. I bought one that i implemented for my home network and it does most things i need. but i didn't choose to implement it over a set of branch offices because i didn't think it was up to the task.

I'm not sure if i would currently recommend it .... :(

Please Log in or Create an account to join the conversation.

More
21 Jul 2014 18:44 #80752 by babis3g
Replied by babis3g on topic Re: 2860 VSDL stats - Error correction rates

AndyHamp wrote: it's not impossible .... it's fact ... and i'm running the latest firmware.

they simply haven't chosen not to implement this functionality. As i have said previously it's not a true commercial grade router. I bought one that i implemented for my home network and it does most things i need. but i didn't choose to implement it over a set of branch offices because i didn't think it was up to the task.

I'm not sure if i would currently recommend it .... :(



The member below post (same forum after my request) seems it has vdsl commands but he is with beta so perhaps they start adding them now & also has and snr tweak value with some betas ... now is worth for recommendation ( i believe :) )
http://www.forum.draytek.co.uk/viewtopic.php?f=13&p=80749#p80746
i am sure next firmware will be much better
and again Thanks for your report & time again

Please Log in or Create an account to join the conversation.

Moderators: Chris