DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2850 - Having trouble forcing fixed Ip to use WAN 2

More
13 Feb 2013 11:10 #75178 by sicon
Set1 is call and Set 2 is Data do Set one will not have a follow on set.

Yes SET2 needs to have Set 3 has the next follow on set, it would look a bit like this

Please Log in or Create an account to join the conversation.

  • wildoat
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 Feb 2013 11:05 #75197 by wildoat
Ok - am away from home at the moment - will give it a go when I get back and let you know how it goes. Many thanks for all your help. W.

Please Log in or Create an account to join the conversation.

  • wildoat
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
15 Feb 2013 15:14 #75215 by wildoat
Now that seems to have done it :D Many thanks for all your help. Cheers. W.

Please Log in or Create an account to join the conversation.

More
15 Feb 2013 17:23 #75216 by sicon
good news!

Please Log in or Create an account to join the conversation.

More
21 Mar 2013 09:36 #75642 by garryf
I have been having the same problem upgrading for a 2820 to a 2850 the load balance policy doesn't work on the 2850

I'm now trying a firewall rule as suggested in this thread.

Please Log in or Create an account to join the conversation.

  • wildoat
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
22 Mar 2013 07:32 #75661 by wildoat
Good luck GarryF. I can confirm that firewal rule has fixed it for me. Cheers W. :)

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami