DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2920 Firmware v3.6.0 and VOIP

  • tgold
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
17 Aug 2012 14:40 #73239 by tgold
Replied by tgold on topic Re: Vigor 2920 Firmware v3.6.0 and VOIP
Although 3.6.1 appeared to be better than 3.6.0, I still did incur one SIP registration drop and so have reverted to 3.3.7.1.

Please Log in or Create an account to join the conversation.

More
17 Aug 2012 18:56 #73247 by babis3g
Replied by babis3g on topic Re: Vigor 2920 Firmware v3.6.0 and VOIP
2 firmwares not good?Can ask each firmare are you using "all" or the "rst" file?
Draytek recommends the rst and configuration all from scratch for each new firmware and not use of other previews firmware back up files
But if you have too many settings, leave the firmware that works for your needing s with out extra hassle of time which may still not work
Thanks for your time :)

Please Log in or Create an account to join the conversation.

  • tgold
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
17 Aug 2012 19:04 #73249 by tgold
Replied by tgold on topic Re: Vigor 2920 Firmware v3.6.0 and VOIP
Confess I always use the .all file and hold over my configuration settings. I could consider using the .rst and then restoring a saved config backup, but re-entering everything from factory scratch by hand would be too high a price to pay.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami