DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2920 Firmware v3.6.0 and VOIP

  • tgold
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
12 Jul 2012 14:21 #72904 by tgold
I just tried firmware v3.6.0 on my 2920 and found that my Gigaset VOIP equipment would not maintain its provider registrations. I reverted back to 3.3.7.1 and VOIP is well again, so I guess playing with IPv6 will have to wait.

Does anyone have any other experiences or any configuration ideas?

Please Log in or Create an account to join the conversation.

More
12 Jul 2012 15:49 #72906 by babis3g
Replied by babis3g on topic Re: Vigor 2920 Firmware v3.6.0 and VOIP
Hi
I dont have the voip model, just the n but did you try to turn off ipv6 top left, next of auto-log tab if you think is something to do with ipv6?

Please Log in or Create an account to join the conversation.

  • tgold
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
12 Jul 2012 15:54 #72907 by tgold
Replied by tgold on topic Re: Vigor 2920 Firmware v3.6.0 and VOIP
Thanks and yes, IPv6 was turned off while I was having VOIP provider registration problems.

Please Log in or Create an account to join the conversation.

More
15 Aug 2012 23:46 #73221 by babis3g
Replied by babis3g on topic Re: Vigor 2920 Firmware v3.6.0 and VOIP
Just to mention there is a new firmware 3.6.1 at Draytek HQ but i don't have the V model to know if is fix about it

Please Log in or Create an account to join the conversation.

  • tgold
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
16 Aug 2012 00:11 #73223 by tgold
Replied by tgold on topic Re: Vigor 2920 Firmware v3.6.0 and VOIP
Thank for the news about 3.6.1. I will give it a try.

Please Log in or Create an account to join the conversation.

  • tgold
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
17 Aug 2012 12:51 #73237 by tgold
Replied by tgold on topic Re: Vigor 2920 Firmware v3.6.0 and VOIP
Thanks again babis3g, at first impression the 3.6.1 is much more VOIP-stable. So far all the several VOIP services are rgistered and are remaining registered instead of flapping up and down as they did under 3.6.0.

I had a minor panic when this upgrade demanded that the workstation client send the firmware file using the Firmware Upgrade Utility, which I had never installed. Previous upgrades had always worked simply with the router/server causing the client's browser to send the data. Fortunately I had previously downloaded this utility and so was able to install it mid-upgrade and while the TFTP server of the router continued to sit and wait for the data.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami