DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

WAN2 Performance on Vigor2820 (80Mb Fibre)

  • pgudge
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
17 Feb 2012 15:38 #71255 by pgudge
Draytek just updated the 2850 feature list to show a Quad WAN ability, both ADSL and VDSL ports can be used at the same time.

I currently have 1xVDSL and 1xADSL lines, so the 2850n is looking like a decent upgrade. I understand 150Mb/s is achievable on WAN2, but would upto 80Mb/s be achievable on the VDSL port?

If I ever get the ADSL port upgraded to VDSL I can move that to WAN2 with a VDSL Modem.

Thanks, PaulG.

Please Log in or Create an account to join the conversation.

More
05 Mar 2012 22:29 #71473 by andrew_toole
Replied by andrew_toole on topic Re: WAN2 Performance on Vigor2820 (80Mb Fibre)
Currently trialing 80MB BT Infinity using WAN2 on 2820. Achieving download speeds of ~75 MB, upload ~15 MB.

Please Log in or Create an account to join the conversation.

  • pgudge
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
05 Mar 2012 23:38 #71474 by pgudge

andrew_toole wrote: Currently trialing 80MB BT Infinity using WAN2 on 2820. Achieving download speeds of ~75 MB, upload ~15 MB.


Thats good to know! I am only getting about 65Mb/s down and 23Mb/s up so its good to know I'm not being restricted by the 2820n, which can clearly do more than 50Mb/s firewall throughput.

Please Log in or Create an account to join the conversation.

More
09 Mar 2012 09:21 #71530 by slime
So am I but getting nasty results since the trial switch! What firmware is on your 2820? I think I am on an old release now (maybe 1 v back) - can't check now as I am at work :(

Thanks - and good to know....

Please Log in or Create an account to join the conversation.

  • pgudge
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
09 Mar 2012 09:57 #71532 by pgudge
I'm currently on 3.3.7.1

3.3.7.1 is not yet available on the Draytek UK site. I was instructed by Draytek UK Support to test this download relating to another issue (huge bug) in the Draytek firmware, and was pointed to ftp://ftp.draytek.com/Vigor2820/Firmware/v3.3.7.1/AnnexA/Vigor2820_V3.3.7.1A_232201.zip

PaulG.

Please Log in or Create an account to join the conversation.

More
10 Mar 2012 16:43 #71540 by slime
Hiya,

Thanks for the reply. I am on v3.3.5.2 so was just about to go 3.3.7.1 but saw a forum thread on here that said public FTP issues with this so people had to revert to 3.3.7.

So, what was the "huge bug" you had with 3.3.7 please?

Not sure which one to go with!

Thanks :)

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami