DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

WAN2 Performance on Vigor2820 (80Mb Fibre)

  • pgudge
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
01 Feb 2012 14:17 #71020 by pgudge
I can't seem to find any about this, but looking at the Comparison chart on Draytek.co.uk the 2820VSn shows a Firewall Performance as 50Mb/s. Does that mean my new 80Mb Fibre is capped at ~50Mb? as I am indeed only getting about 47Mb-54Mb download rates?

Thanks,

PaulG.

Please Log in or Create an account to join the conversation.

More
01 Feb 2012 17:59 #71024 by rj
Hi,

Yup, you're correct.

For that kind of throughput, i advise new DrayTek models :

Vigor2830
Vigor2920

Where you get a max. throughput of ~150Mbps.

regards,

rj

Please Log in or Create an account to join the conversation.

More
02 Feb 2012 11:02 #71039 by drummerbod
Replied by drummerbod on topic Re: WAN2 Performance on Vigor2820 (80Mb Fibre)
The chart states:

2920 90mbps
2830 50mbps

Please Log in or Create an account to join the conversation.

  • pgudge
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
02 Feb 2012 16:56 #71051 by pgudge
Thanks for the replies!

Do you know anything about the 2850? Its a brand new box, but the website says 50Mb/s also, is this the same hardware as the 2820 or might it support more like the 2830 does?

Please Log in or Create an account to join the conversation.

More
03 Feb 2012 09:10 #71055 by voodle

pgudge wrote: I can't seem to find any about this, but looking at the Comparison chart on Draytek.co.uk the 2820VSn shows a Firewall Performance as 50Mb/s. Does that mean my new 80Mb Fibre is capped at ~50Mb? as I am indeed only getting about 47Mb-54Mb download rates?

Thanks,

PaulG.



What firmware are you using?

Could you try the 3.3.7 firmware and see if that makes the WAN speeds better?

Also, make sure to use the wired network rather than wireless when testing speeds as the wireless will give lower speeds due to how it's connected up internally.

Please Log in or Create an account to join the conversation.

  • pgudge
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
03 Feb 2012 09:56 #71060 by pgudge
Currently on 3.3.7. I heard back from Draytek yesterday also, they said it is a "50Mb/s is a hardware limit of the 2820" :(

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami