DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

slow 2830 on a new Fiber connection

  • mattgg
  • Topic Author
  • Offline
  • New Member
  • New Member
More
27 Dec 2011 12:08 #70581 by mattgg
slow 2830 on a new Fiber connection was created by mattgg
Just had a very fast connection installed and I'm getting great results when I connect the computer to the fiber modem or use my time-capsule as my router (connected to the fiber modem) but less than 100 meg speeds when I use the 2830 as the router. I have no idea why. I did look in the Wan2 settings and found it is a gigabit speed wan port, but I noticed the settings for that port only go up to 100meg full duplex. Any ideas would be greatly appreciated, I have spent hours resetting the config from scratch and testing lots of settings. How is it possible my awesome router is 100 times slower than the time-capsule in this instance!!?

Please Log in or Create an account to join the conversation.

More
27 Dec 2011 14:11 #70584 by rothers

Please Log in or Create an account to join the conversation.

  • mattgg
  • Topic Author
  • Offline
  • New Member
  • New Member
More
27 Dec 2011 16:30 #70585 by mattgg
Replied by mattgg on topic Re: slow 2830 on a new Fiber connection

rothers wrote: 50 mb/s max for the 2030

http://www.draytek.co.uk/products/comparison.html



Thanks Rothers, but it's a 2830.

FYI: Secondary WAN Port : Gigabit (1000Mb/s))
http://www.draytek.co.uk/products/vigor2830.html

Please Log in or Create an account to join the conversation.

  • mattgg
  • Topic Author
  • Offline
  • New Member
  • New Member
More
28 Dec 2011 11:04 #70588 by mattgg
Replied by mattgg on topic Re: slow 2830 on a new Fiber connection
I've made sure the bandwidth management has been disabled too.

Please Log in or Create an account to join the conversation.

More
28 Dec 2011 16:05 #70595 by rothers
Replied by rothers on topic Re: slow 2830 on a new Fiber connection
Typo 2030 -> 2830

Please Log in or Create an account to join the conversation.

  • mattgg
  • Topic Author
  • Offline
  • New Member
  • New Member
More
28 Dec 2011 17:55 #70597 by mattgg
Replied by mattgg on topic Re: slow 2830 on a new Fiber connection
Rothers, I can only find documentation saying the wan2 port is a giga lan.. where does it say 50meg only?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami