DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Firmware update 3.3.4.1..

More
31 Oct 2010 11:12 #64584 by markiebrown
Replied by markiebrown on topic Firmware update 3.3.4.1..
I too have just upgraded from the new 3341 to 3.3.5 RC2a and noticed an immediate increase in speed with my BE 24 meg.
Went from about 17meg dl & 1.1meg ul to about 20.2dl & 2.1ul
I'm only about 200meters from my exchange (Can see it from my place) so very annoying that I don't actually get full speed.

Though have noticed that QOS doesn't seem to be working properly. (If I go by the graphs)

Not sure what else is not working properly in the 3.3.5 RC2a but I'm going to run with it for a while and see if it falls over or stays up.

Please Log in or Create an account to join the conversation.

More
31 Oct 2010 11:26 #64585 by ghostworks
Replied by ghostworks on topic Firmware update 3.3.4.1..
how do i get 3.3.5 RC2a as i'm having issues with 3.3.4.1 and 3.3.4

Please Log in or Create an account to join the conversation.

More
31 Oct 2010 11:37 #64586 by markiebrown
Replied by markiebrown on topic Firmware update 3.3.4.1..
I got it from
ftp://ftp.draytek.pl/Seria_2820/Firmware/

Please Log in or Create an account to join the conversation.

More
31 Oct 2010 11:40 #64587 by ghostworks
Replied by ghostworks on topic Firmware update 3.3.4.1..
thanks for the fast reply on the ftp site

did the beta sort the dual WAN issue

Please Log in or Create an account to join the conversation.

More
31 Oct 2010 11:46 #64588 by markiebrown
Replied by markiebrown on topic Firmware update 3.3.4.1..
Not sure mate, haven't had time to test properly...
You'll have to let us know your experiences....

Please Log in or Create an account to join the conversation.

More
31 Oct 2010 11:52 #64589 by ghostworks
Replied by ghostworks on topic Firmware update 3.3.4.1..
ok will do

running syslog server and syslog USB for test's
will let new beta run for 1 hour before adding WAN1 connection and see results and post

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami