DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Firmware update 3.3.4.1..

  • big_dennis
  • Topic Author
  • Offline
  • New Member
  • New Member
More
13 Oct 2010 18:58 #64243 by big_dennis
Firmware update 3.3.4.1.. was created by big_dennis
So am I right in assuming that this update has broken pro update speeds (2.4 ish meg) on Be Pro?

Sory to be so straight about this but I am quite annoyed - so much so that my next router will no be Draytek...............

Please Log in or Create an account to join the conversation.

More
14 Oct 2010 19:56 #64253 by reado
Replied by reado on topic Firmware update 3.3.4.1..
I too noticed this issue recently when I upgraded. I usually get the full 24Mbit down and 2.5 up.

Please Log in or Create an account to join the conversation.

More
15 Oct 2010 11:08 #64262 by howard simpson
Replied by howard simpson on topic Firmware update 3.3.4.1..
Installing 3.3.4.1 seems to have changed the MTU setting for some people. If you adjust your MTU down your speed should return.

Howard

Please Log in or Create an account to join the conversation.

  • big_dennis
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Oct 2010 18:04 #64274 by big_dennis
Replied by big_dennis on topic Firmware update 3.3.4.1..
Thanks Howard. :D

Do you know what it has changed from and to so I can correct it?

I changed from FW 3.3.3 to 3.3.4.1.

Thanks very much..

Please Log in or Create an account to join the conversation.

More
18 Oct 2010 09:41 #64281 by howard simpson
Replied by howard simpson on topic Firmware update 3.3.4.1..
Try 1442 but also see this post http://www.forum.draytek.co.uk/viewtopic.php?t=14881&start=30

Howard

Please Log in or Create an account to join the conversation.

  • big_dennis
  • Topic Author
  • Offline
  • New Member
  • New Member
More
18 Oct 2010 21:34 #64287 by big_dennis
Replied by big_dennis on topic Firmware update 3.3.4.1..
Thanks for your help Howard.

Tried all sorts for over 2 hours but no good.

Got a copy of 3.3.5 RC2a and all my problems just went away. (not that I use the advanced features.. :shock: )

3.3.4.1 is definitly busted. Not good. Upload on BE Pro annex M is capped at 1.1 Mbit with this firmware version.....

Thanks again for your help.

Dennis.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami