DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2820 with two vgAP700s acting as repeaters

More
03 Sep 2010 14:33 #63658 by rpg
Could this be a channel issue, i.e. both AP's working on the same channel and seeing each other (albetit not at a strong enough signal to do anything useful) thereby causing a conflict / fight between the AP's.

Please Log in or Create an account to join the conversation.

More
03 Sep 2010 14:36 #63659 by rpg

rpg wrote: Could this be a channel issue, i.e. both AP's working on the same channel and seeing each other (albetit not at a strong enough signal to do anything useful) thereby causing a conflict / fight between the AP's.



Thats not actually very sensible as each AP would need to be on the same channel as the 2820.

But could it the fact that as both AP see each other they fight?

Alternatively, can the basement AP see another Wireless network that is conflicting, which the 2820 and top floor AP can not see?

Please Log in or Create an account to join the conversation.

  • stugster
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 Sep 2010 12:59 #63776 by stugster
Hi,

No, the only AP's the two are configured to talk to are the 2820. There are a couple other access points in the buildings next-door but they're either on another channel or the signal is really weak anyway.

I'm going to try setting them up as universal repeaters to see if that makes a difference.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami