DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2820 with two vgAP700s acting as repeaters

  • stugster
  • Topic Author
  • Offline
  • New Member
  • New Member
More
28 Aug 2010 09:43 #63576 by stugster
Hey guys,

Last week we installed one AP700 as a repeater in a hotel using a 2820. After following Micky's instructions for setting up WDS mode here: http://www.draytek.co.uk/support/kb_wlan_AP700_WDS.html everything worked perfectly.

The hotel came back to us a while later asking us to put another one in the basement (the first went on the top floor). After following the same setup, for some reason both AP's continually drop off.

Looking at the link status of the WDS in the 2820 panel, the two AP's stay linked for a few seconds, then drop off intermittently. It seems that neither one stays on at the same time and they're "fighting" for access.

All three devices use the same SSID, the same channel, and the same WPA2 password. Switching one AP off allows the other continuous access and viceversa, but when both are on the problems occur.

Is there any reason why two AP's on the same network would cause a problem?

Please Log in or Create an account to join the conversation.

  • stugster
  • Topic Author
  • Offline
  • New Member
  • New Member
More
28 Aug 2010 09:55 #63577 by stugster
Just some further information:

Model Name : Vigor2820n
Firmware Version : 3.3.3_232201

At 9:51am the following was viewed in WDS Link Status:
U 00:50:7F:6C:0C:10
D 00:50:7F:6C:1A:10

At 9:53am the following was viewed in WDS Link Status:
U 00:50:7F:6C:0C:10
U 00:50:7F:6C:1A:10

At 9:54am the following was viewed in WDS Link Status:
D 00:50:7F:6C:0C:10
U 00:50:7F:6C:1A:10

At 9:55 both links showed D's

Please Log in or Create an account to join the conversation.

More
28 Aug 2010 14:44 #63584 by howard simpson
Replied by howard simpson on topic Vigor 2820 with two vgAP700s acting as repeaters
Disd you change the mode of the 2820 to repeater when you added the extra AP?

Howard

Please Log in or Create an account to join the conversation.

  • stugster
  • Topic Author
  • Offline
  • New Member
  • New Member
More
31 Aug 2010 10:56 #63608 by stugster
No, should it be?

At the moment it's as follows:


Please Log in or Create an account to join the conversation.

  • stugster
  • Topic Author
  • Offline
  • New Member
  • New Member
More
31 Aug 2010 11:06 #63609 by stugster
Just to add, changing it to repeater doesn't make any difference - the links still intermittently drop.

Please Log in or Create an account to join the conversation.

  • stugster
  • Topic Author
  • Offline
  • New Member
  • New Member
More
03 Sep 2010 14:18 #63656 by stugster
Sorry to bump, but has anyone got any ideas to resolve this? How should I proceed for support?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami