DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820Vn PSTN Relay Not Working

More
01 Oct 2009 17:24 #58039 by mikeytt
Replied by mikeytt on topic 2820Vn PSTN Relay Not Working
Could you elaborate a little more on that please?

If you change the gain to 10, then pick a phonebook entry i.e. #001270123456 works fine if you just select that from your phone and hit the green button? (So it dials it all in one go.)

I assume that the dialplan still doesn't function correctly?

Thanks

Mike...

Draytek Vigor 2820Vn
Firmware: 3.3.2.1_211801_A
Pipex Business (8Mb - Getting 3 - 3.5Mb)

Please Log in or Create an account to join the conversation.

More
01 Oct 2009 17:34 #58041 by jhamshaw
Replied by jhamshaw on topic 2820Vn PSTN Relay Not Working
I haven't tried (don't use) phonebook entries - but numbers that can't be dialled via SIP, e.g. 123, 1571, 999 that are placed in the PSTN Relay settings (i.e. relayed automatically to PSTN without needing #0) now work with the Mic gain turned up to 10...

Please Log in or Create an account to join the conversation.

More
02 Oct 2009 09:31 #58048 by mikeytt
Replied by mikeytt on topic 2820Vn PSTN Relay Not Working
Oooooh, sounds promising then. Can't wait to get home tonight and try it out.

When I mentioned phone book entries, I actually meant ones in your physical phone.

I'll try it over the weekend and see if it really is a fix for us all.

Cheers

Mike...

Draytek Vigor 2820Vn
Firmware: 3.3.2.1_211801_A
Pipex Business (8Mb - Getting 3 - 3.5Mb)

Please Log in or Create an account to join the conversation.

More
02 Oct 2009 09:51 #58050 by jhamshaw
Replied by jhamshaw on topic 2820Vn PSTN Relay Not Working
If the numbers in your physical phone can be stored with the #0, then they should work in the same way as dialing #0xxxxxxxxxxxx as one big string then pressing the green key to dial the lot - tested and working for me!!

Good luck!

Jim

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami