DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820Vn PSTN Relay Not Working

  • busta999
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
24 Sep 2009 09:22 #57885 by busta999
Replied by busta999 on topic 2820Vn PSTN Relay Not Working
The single biggest issue I have is is that if you dial 999 from a phone in the house it fails.

That worries me that I either have to educate everyone coming into the house to dial #0 wait a few seconds then dial 999 to get an emergency number. I just think people will remember.

Niggling is the same but different issue of 1571 for BT VM.

The alternative is to run two phone systems around the house and label the SIP phones as not suitable for Emergency Calls.

Please Log in or Create an account to join the conversation.

More
28 Sep 2009 13:33 #57926 by mikeytt
Replied by mikeytt on topic 2820Vn PSTN Relay Not Working
I've been working with one of their technical gys and they have given me a new firmware to try. It now shows to them that the call is routed through the PSTN, but they don't currently understand why it's not dialling properly.

I've tried a few cables as JHamshaw suggested, but it looks like my original cable is fine. I can do a #0, pause, dial fine, but with some cables I can't even get a #0 to bring up a dial tone.

I'll post back when I get further with their support.

Mike...

Draytek Vigor 2820Vn
Firmware: 3.3.2.1_211801_A
Pipex Business (8Mb - Getting 3 - 3.5Mb)

Please Log in or Create an account to join the conversation.

  • busta999
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
28 Sep 2009 21:04 #57934 by busta999
Replied by busta999 on topic 2820Vn PSTN Relay Not Working
mmmm we shall see I have been given a phone number in Tech Support to call with the RMA number I have to discuss further. But basically the issue remains consistent and repeatable ...

I have created a video and I published it on this problem. The issue is consistent and repeatable.

Tried all the config options provided by Tech Support - supplied screen shots of the current config as requested by support.

Tried different phones, different manufacturers, cordless and corded.

Tried ADSL filters from multiple different manufacturers.

Tried 4 different tel leads from the unit to the wall, including the one provided.

Tried on the two tel sockets in the house Master and Slave. Same problem.

Tried two different units. Same problem, consistent and repeatable.

The only thing to do now is to move house and try it on a different phone line, but this is not practical.

The house is 5 years old, as is the estate I live on. The ADSL part works fine so I suspect a fault with the product.

But I do need a product that will work in my house and not just Tech Support.

Please Log in or Create an account to join the conversation.

  • busta999
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
29 Sep 2009 14:49 #57958 by busta999
Replied by busta999 on topic Video demonstrating issue
having now tried two 2820vns I am still getting the blocked calls issues

I am running into there is another problem (not router) issue with support so i have published a video ono YouTube documenting the issue.

I you are experiencing this same problem I suggest you raise a problem ticket with support and point them to this video.

Good luck

http://www.youtube.com/watch?v=jHlfazG4-sw

Please Log in or Create an account to join the conversation.

More
29 Sep 2009 18:48 #57970 by jhamshaw
Replied by jhamshaw on topic 2820Vn PSTN Relay Not Working
Nicely done, and a good demo on the video, but a BAD idea to regularly test with 999 in the event that it does actually work for someone!!

123 has the same effect, and just gets you the speaking clock (or not....!) :roll:

Please Log in or Create an account to join the conversation.

More
01 Oct 2009 16:45 #58037 by jhamshaw
Replied by jhamshaw on topic 2820Vn PSTN Relay Not Working
PSTN Relay issue sorted for me!!!



Thanks to Harry at Draytek UK Tech Support the fix that worked for me was :-

Could you try changing the Mic Gain to 10 in

VoIP -> Phone Settings -> Index 1 -> Advanced

All Sorted! Just an automatic pause after #0 needed now, so we can dial on cordless handsets before pressing the green button....

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami