DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor AP 910c playing up

  • tom-burnett
  • Topic Author
  • Offline
  • New Member
  • New Member
More
13 Apr 2022 10:21 #101003 by tom-burnett
Vigor AP 910c playing up was created by tom-burnett
HI,
We have a customer who is running 3 Vigor AP910c FW 1.3.4 with DT POE switches and and Vigor 2952.

Problems the are have :
(1) Slow 2.4GHZ
(2) sometime users can not connect Wi-Fi
(3) Some time Band steering is not work 2.4ghz and 5ghz.
(4) on Friday and today access point stop responding could not ping the 3 AP's. switch the power off on the 3 switch ports and the aps powered back up and worked. AP1 is 1 switch ap 2 and 3 are on another switch.

local LAN run very good.

support on each AP
have changed channels 2.4ghz and 5Ghz
Lowed power 2.4 Ghz
ACS switch off
reset AP
removed some Vlans (on 0 and 100) 100 used guest network for wifi.
2.4Ghz changed from 20/40 auto to 20hz
and done other things.

Any one seen this problem before?


thanks
Tom

Please Log in or Create an account to join the conversation.

More
13 Apr 2022 10:33 #101004 by edinburgh
Replied by edinburgh on topic Re: Vigor AP 910c playing up
If you search these fora, you'll come across a thread or two which raise similar issues. I don't think there's been a permanent fix, although some have suggested some workarounds.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami