DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Reset a Bricked AP 802

  • ianmurray
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
10 Apr 2022 14:29 #100979 by ianmurray
Reset a Bricked AP 802 was created by ianmurray
I have an AP 802 that failed during a firmware upgrade.

I have tried to Factory Reset it but nothing seems to work.

Does anyone have any ideas on how i can recover this device?

as soon as i plug it it i get 2 green lights flashing, and no other response.

Please Log in or Create an account to join the conversation.

More
10 Apr 2022 22:12 #100985 by edinburgh
Replied by edinburgh on topic Re: Reset a Bricked AP 802
Have you tried a Google search?

Here is a guide (found using a Google search): https://draytek.co.uk/support/guides/kb-firmwarerecovery-ap

Please Log in or Create an account to join the conversation.

More
11 Apr 2022 01:28 #100988 by hornbyp
Replied by hornbyp on topic Re: Reset a Bricked AP 802

ianmurray wrote:
I have tried to Factory Reset it but nothing seems to work.


Have you reset it using the procedure in the User Guide :?:

The AP802 User Guide wrote: Press the button for more than 15 seconds. When the ACT LED flashes rapidly, release the button. Then, the device will restart with the default configuration.



Does the default Access Point "Draytek_nnnnn" show up :?:

You can try the TFTP approach detailed in the Draytek guide ... but I'm not sure the AP802 supports it...

Please Log in or Create an account to join the conversation.

More
11 Apr 2022 01:41 #100989 by hornbyp
Replied by hornbyp on topic Re: Reset a Bricked AP 802

hornbyp wrote:
You can try the TFTP approach detailed in the Draytek guide ... but I'm not sure the AP802 supports it...


I just tried it (using the front Button, since there is no hidden switch); it just boots as normal. (Power + "Uplink" illuminated; "Uplink" goes out after a few seconds. Then rest of LEDS light, as appropriate)

Please Log in or Create an account to join the conversation.

  • ianmurray
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
11 Apr 2022 19:17 #100994 by ianmurray
Replied by ianmurray on topic Re: Reset a Bricked AP 802

edinburgh wrote:
Have you tried a Google search?

Here is a guide (found using a Google search): https://draytek.co.uk/support/guides/kb-firmwarerecovery-ap



Thanks for this, but it’s for a 902 not an 802, the other complication I haves is being a Mac user…

Please Log in or Create an account to join the conversation.

  • ianmurray
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
11 Apr 2022 19:18 #100995 by ianmurray
Replied by ianmurray on topic Re: Reset a Bricked AP 802

hornbyp wrote:

hornbyp wrote:
You can try the TFTP approach detailed in the Draytek guide ... but I'm not sure the AP802 supports it...


I just tried it (using the front Button, since there is no hidden switch); it just boots as normal. (Power + "Uplink" illuminated; "Uplink" goes out after a few seconds. Then rest of LEDS light, as appropriate)



For me though it just flashes the 2 leds and never changes

Please Log in or Create an account to join the conversation.

Moderators: Sami