DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Guest Wifi & vlans

More
10 Dec 2021 17:18 #100222 by mbames
Replied by mbames on topic Re: Guest Wifi & vlans

Piste Basher wrote:
Have you tried connecting an AP directly to P1, eliminating the intermediate devices ?



Not yet; that is a last resort, as I'm not sure where the PSUs are for them :( Might have to have a search around tonight.

Please Log in or Create an account to join the conversation.

More
10 Dec 2021 17:40 #100223 by piste basher
Replied by piste basher on topic Re: Guest Wifi & vlans
I've not used a 910 but I use 960s and 903 and I can't see that you're doing anything wrong so I guess that must be tried before we can go further.

Please Log in or Create an account to join the conversation.

More
10 Dec 2021 18:03 #100224 by mbames
Replied by mbames on topic Re: Guest Wifi & vlans
Had a dig around and found a suitable PSU. Tried with it one of the 910c's plugged directly it P1 (ie the rest of the house unplugged) - my normal SSID one works and the guest doesn't.

Repeated with the 910c plugged into one of the 4 switch ports on the SamKnows box. Both the 2925 and the 910c have been rebooted, so I'm a bit stuck now, short of trying unticking "Permit untagged device in P1 to access router"

Have added P2 to VLAN2/LAN3 and tried with the AP plugged into that, again no different. Normal SSID works, guest one doesn't.

I'm following this guide https://draytek.co.uk/support/guides/kb-centralapm-psk#vlan-configuration
and this one, which is broadly the same https://www.draytek.com/support/knowledge-base/5320

Central AP Stats


Updated VLAN settings for p2

Please Log in or Create an account to join the conversation.

More
10 Dec 2021 20:54 #100226 by mbames
Replied by mbames on topic Re: Guest Wifi & vlans
Update, but not yet there 100% of the way.

Issue 1. Don't have Isolate: From LAN ticked in the WiFi Central AP management screens
Issue 2. The SamKnows "whitebox" uses the lan/wan ports and was eating the vlan tagged traffic
Issue 3. My Netgear switch is also eating the tagged vlan traffic

I've resolved issues 1 and 2, but not sure how to configure the Netgear managed switch yet (any ideas, anyone??). Therefore at the moment, I have have one AP working, it is plugged into P2 on the 2925 and powered directly.

Please Log in or Create an account to join the conversation.

More
10 Dec 2021 21:33 #100227 by mbames
Replied by mbames on topic Re: Guest Wifi & vlans
Well I do believe that's fixed it... first venture into vlan configuration on that switch.



and a copy of the users guide ( https://ames.org.uk/tmp/draytek/GS752TP_GS728TP_GS728TPP_SWA_3Dec2013.pdf ), in case I have to revisit this post in the future!

Please Log in or Create an account to join the conversation.

More
11 Dec 2021 08:42 #100230 by piste basher
Replied by piste basher on topic Re: Guest Wifi & vlans
Glad you found the culprit :D

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami