DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

No channel 6 on AP910C

  • mmcdona6
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
24 Oct 2020 10:17 #97519 by mmcdona6
Replied by mmcdona6 on topic Re: No channel 6 on AP910C

colinjmair wrote:
GB is what should be in the country code, if you are in the uk.
If, on the AP you want on channel 6, you go into Diagnostics, Interference Monitor, pick All Channels, and click refresh on the 24GHz band, does it see high utilisation or energy on Channel 6 ?

regards

Colin



Channel Utilization 5% Channel Energy 39% APs 0

Please Log in or Create an account to join the conversation.

More
24 Oct 2020 11:09 #97521 by colinjmair
Replied by colinjmair on topic Re: No channel 6 on AP910C
The channel energy, which is basically a measure of the noise floor, on other Draytek APs it is titled 'Noise Floor'. seems rather high.
Do the other APs also show similar energy values on Channel 6 ?
On the APs using Channels 1 & 11, what energy values are shown on the channels they are using in Diagnostics, Interference Monitor ?

Are you using PoE to power the APs or a power supply ?

regards

Colin

Please Log in or Create an account to join the conversation.

  • mmcdona6
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
26 Oct 2020 08:04 #97532 by mmcdona6
Replied by mmcdona6 on topic Re: No channel 6 on AP910C

colinjmair wrote:
The channel energy, which is basically a measure of the noise floor, on other Draytek APs it is titled 'Noise Floor'. seems rather high.
Do the other APs also show similar energy values on Channel 6 ?
On the APs using Channels 1 & 11, what energy values are shown on the channels they are using in Diagnostics, Interference Monitor ?

Are you using PoE to power the APs or a power supply ?

regards

Colin



I tried the interference monitor scan on another access point and for channel 6 it shows as Channel Utilization 3% Channel Energy 38% APs 0 (in fact channels 5,6,7 and 8 all show a similar reading)

For channel 1 (the access point transmitting on channel 1) the numbers are Channel Utilization 8% Channel Energy 5% APs 3
For channel 11 (the access point transmitting on channel 11) the numbers are Channel Utilization 5% Channel Energy 17% APs 0

All access points are powered by POE

Please Log in or Create an account to join the conversation.

More
27 Oct 2020 10:25 #97542 by colinjmair
Replied by colinjmair on topic Re: No channel 6 on AP910C
It's interesting that all the Aps are seeing quite high levels of energy(noise) on Channel 6 but no APs.
Am I right in thinking that none of the APs can be set to Channel 6 ?

regards

Colin

Please Log in or Create an account to join the conversation.

  • mmcdona6
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
27 Oct 2020 10:28 #97543 by mmcdona6
Replied by mmcdona6 on topic Re: No channel 6 on AP910C

colinjmair wrote:
It's interesting that all the Aps are seeing quite high levels of energy(noise) on Channel 6 but no APs.
Am I right in thinking that none of the APs can be set to Channel 6 ?

regards

Colin



I haven't tried them all, but I have tried at least one other and it wouldn't work on channel 6 either

Please Log in or Create an account to join the conversation.

  • mmcdona6
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
08 Nov 2020 12:42 #97638 by mmcdona6
Replied by mmcdona6 on topic Re: No channel 6 on AP910C

colinjmair wrote:
It's interesting that all the Aps are seeing quite high levels of energy(noise) on Channel 6 but no APs.
Am I right in thinking that none of the APs can be set to Channel 6 ?

regards

Colin



Colin. Do you have any conclusions from all this information? Are you perhaps suggesting that something else in the house is blasting out a lot of interference on channel 6? What could that be, Bluetooth devices, Sonos? We do have a lot of Sonos devices but they are all hardwired with the wifi switched off. We also have a few Logitech Harmony remotes which I think use Bluetooth, between the remote and hubs.

Thanks for your help. Michael

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami