DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

903 Mesh Node wired up link and roaming settings

  • brightonrob
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
05 Sep 2020 17:22 #97085 by brightonrob
903 Mesh Node wired up link and roaming settings was created by brightonrob
Hi my environment is 903 root, 903\802 nodes and a 2860

I dont suppose if you know the most sensible roaming setting for a 903 in mesh node with a wired uplink. I standardly have minimum RSSI set as per draytek recommendation on all nodes, but that doesnt seem to make sense on a wired uplink as there is no signal reporting in the way that a wireless connection makes. I thought minimum basic rate makes sense but I wanted to check my thinking is right.

I realise this can be an involved topic involving logging etc but I wanted to find the most sensible default option, see how that goes, then get more elegant should that fail!


Many thanks

Please Log in or Create an account to join the conversation.

More
05 Sep 2020 18:49 #97087 by hornbyp
Replied by hornbyp on topic Re: 903 Mesh Node wired up link and roaming settings

BrightonRob wrote:
I standardly have minimum RSSI set as per draytek recommendation on all nodes, but that doesnt seem to make sense on a wired uplink as there is no signal reporting in the way that a wireless connection makes. I thought minimum basic rate makes sense but I wanted to check my thinking is right



The RSSI, in question, is between Access Point and Wireless Client - so the uplink part is irrelevent.
FWIW, the parameters I use are in this thread: [url] http://www.forum.draytek.co.uk/viewtopic.php?f=19&t=23585&sid=b1fdf8829c3921b1d900c0f6a340859a#p96660 [/url]

Please Log in or Create an account to join the conversation.

  • brightonrob
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
06 Sep 2020 15:22 #97098 by brightonrob
Replied by brightonrob on topic Re: 903 Mesh Node wired up link and roaming settings

hornbyp wrote:

BrightonRob wrote:
I standardly have minimum RSSI set as per draytek recommendation on all nodes, but that doesnt seem to make sense on a wired uplink as there is no signal reporting in the way that a wireless connection makes. I thought minimum basic rate makes sense but I wanted to check my thinking is right



The RSSI, in question, is between Access Point and Wireless Client - so the uplink part is irrelevent.
FWIW, the parameters I use are in this thread: [url] http://www.forum.draytek.co.uk/viewtopic.php?f=19&t=23585&sid=b1fdf8829c3921b1d900c0f6a340859a#p96660 [/url]



Thanks for the parameters, I'll give them a go and see how they work in my home. I realised I didnt understand how RSSI works.

Is the route back from a mesh node to the network ever a consideration in the choice of node to attach to. It just seems if you have 2 competing nodes one with a wired uplink, one with 3 hops, the speed of connection and stability would seem the wired node. That being the case is this speed to the network refelcted in the parameters?

Please Log in or Create an account to join the conversation.

More
07 Sep 2020 17:20 #97111 by hornbyp
Replied by hornbyp on topic Re: 903 Mesh Node wired up link and roaming settings

BrightonRob wrote:
Is the route back from a mesh node to the network ever a consideration in the choice of node to attach to....That being the case is this speed to the network refelcted in the parameters?


My guess is, that a client only has access to the signal strength - with no visibility of the underlying topology. You could have a read through the IEEE 802.11s documentation, but as I understand it, no manufacturer has actually implemented it - at least not fully.

https://www.researchgate.net/publication/224116334_IEEE_80211s_the_WLAN_mesh_standard

Let us know what you find :lol:

Please Log in or Create an account to join the conversation.

  • brightonrob
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
07 Sep 2020 17:45 #97112 by brightonrob
Replied by brightonrob on topic Re: 903 Mesh Node wired up link and roaming settings

hornbyp wrote:

BrightonRob wrote:
Is the route back from a mesh node to the network ever a consideration in the choice of node to attach to....That being the case is this speed to the network refelcted in the parameters?


My guess is, that a client only has access to the signal strength - with no visibility of the underlying topology. You could have a read through the IEEE 802.11s documentation, but as I understand it, no manufacturer has actually implemented it - at least not fully.

https://www.researchgate.net/publication/224116334_IEEE_80211s_the_WLAN_mesh_standard

Let us know what you find :lol:



Wow, interesting although from my perspective counter intuitive. But can I check link speed would be the level of throughput from point a to b, so client via network or vice versa?

I may have a go at the documentation, help with my insomnia!! :D

Please Log in or Create an account to join the conversation.

More
08 Sep 2020 00:08 #97114 by hornbyp
Replied by hornbyp on topic Re: 903 Mesh Node wired up link and roaming settings

BrightonRob wrote:
But can I check link speed would be the level of throughput from point a to b, so client via network or vice versa?



The Reported "Link Speed", that you see on your phone (for example), seems to be based on a combination of theoretical maximum for the type of connection and the signal strength (according to Netgear: https://kb.netgear.com/19668/Link-Rate-and-Transfer-Speed ). It seems to have absolutely nothing in common with any data rate you can actually measure :( )

FWIW, I did some throughput tests of my Wifi network here: https://forum.draytek.co.uk/viewtopic.php?f=19&t=23630&p=96609#p96609

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami