DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

VigorAP 903 and 802 Mesh with Multi VLAN/SSID not working

  • troozers
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 Dec 2019 19:10 #95319 by troozers
Hi all,

Just bought a VigorAP 903 and a VigorAP 802, and have configured them in a Mesh in the following way
* VigorAP 903 as the MeshRoot
* VigorAP 802 as a MeshNode

I've created two SSID's; INTERNAL and DMZ and assigned a VLAN ID for both (INTERNAL=1, DMZ=10).

However, I never seem to get the wireless clients to pick up the correct DMZ ip subnet, it always assigns the INTERNAL subnet. Also, ALL of the clients seem to connect to the MeshNode and not the MeshRoot. Is this normal? If I switch off the VigorAP 802 (MeshNode) I can still see the two SSIDs, but it never seems to give me an IP address for either SSIDs.

I've also tried to configure VigorAP 903 to use LAN-B for the DMZ SSID and connected it physically to the DMZ, but that doesn't seem to work either, either it struggles to assign a DMZ IP or just assigns a INTERNAL IP. Is this because the 802 only has one LAN port? What's the best way to get the above working?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami