Hi,

I have an AP903 set to repeater mode off a 910c via 5Ghz.

The connection between them works fine. I am testing via Ethernet direct to the AP903, however my 2860LN Router (latest Firmware), is telling me there is an IP conflict on the AP. I have tried to set a static instead of DHCP mode, and I get the same thing.

It seems the AP has 2 IP Address's which I can route to, 192.168.9.5 (Statically Set within the AP903), and 192.168.9.49 which has come out of nowhere.

I've check all the settings on the AP and can find nothing that would possible fire out a secondary IP address.

Thank you in advance for any responses.

Just to update.

I have tried this on a 2762AC with a 5Ghz link to the AP903, and the same problem occurs.

It seems to only happen when using 5Ghz.