DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor2860ac issues with Sky+ app since FW 3.8.6_BT

  • gsb1
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
21 Mar 2018 06:32 #91141 by gsb1
I use the Sky+ app on my android, which connects to my Sky box planner when I am at home. This all worked fine until I updated my Vigor2860ac to v3.8.6 firmware. Prior to this I *think* I was using 3.8.5 firmware, although may have been 3.8.4.5. Now the app does not see the Sky+ box if I am connected to the 2860's wifi. If I connect via a different wifi AP on my home network it works fine. Even if I connect via VPN from an external wifi network, it works fine. So for sure the 2860 wifi where the issue sits (2.4GHz and 5GHz SSIDs). I have tried disabling DoS defense, but no change. Unfortunately the Draytek is my main AP and the others I have are for extremities of my house. Any ideas please?

Please Log in or Create an account to join the conversation.

More
21 Mar 2018 12:15 #91146 by bookit
Please see my post "Board index ‹ Vigor Routers ‹ General Product Usage < 2860ac Sky Q and DLNA problem" I guess this is the same SSDP problem.

Please Log in or Create an account to join the conversation.

  • gsb1
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
21 Mar 2018 12:19 #91147 by gsb1

BookIT wrote: Please see my post "Board index ‹ Vigor Routers ‹ General Product Usage < 2860ac Sky Q and DLNA problem" I guess this is the same SSDP problem.



I already replied in that thread pointing to this. For sure the root cause must be the same. I logged a support case but am yet to hear anything back.

Please Log in or Create an account to join the conversation.

  • gsb1
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
22 Mar 2018 19:30 #91172 by gsb1
Draytek support have provided FW 3.8.9, which so far looks to solve the problem.

Please Log in or Create an account to join the conversation.

  • gsb1
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
22 Mar 2018 19:49 #91174 by gsb1

GSB1 wrote: Draytek support have provided FW 3.8.9, which so far looks to solve the problem.



My bad, problem still persists with FW 3.8.9.

Please Log in or Create an account to join the conversation.

More
24 Mar 2018 17:16 #91185 by jumpy07
We had major DHCP issues with 3.8.6, was really odd, seemed to effect our SIP phones and Imacs only... PC's and phones were ok...

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami