DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

AP910c F/W 1.2.0 issues

More
04 Apr 2017 19:18 #88647 by admin
Replied by admin on topic Re: AP910c F/W 1.2.0 issues
Apparently the issue is know in 1.2.0 and new f/w should be available soon.



Forum Administrator

Please Log in or Create an account to join the conversation.

More
08 Apr 2017 23:51 #88659 by alanjob
Replied by alanjob on topic Re: AP910c F/W 1.2.0 issues
Sorry DrayTek, you've lost another AP customer to Ubiquiti.
I simply cannot get my AP902 working on either 1.1.7.3 or 1.2.0 using RADIUS authentication.
I works for a while then just stops passing traffic.
I simply don't have the time to mess with something that doesn't work.
Alan

Please Log in or Create an account to join the conversation.

More
09 Apr 2017 00:03 #88660 by wrightclick
Replied by wrightclick on topic Re: AP910c F/W 1.2.0 issues
Yeah, reports aren't great from my end either. They're still having to reboot APs which is totally unacceptable. Going to raise it with my supplier on Monday and probably return the 910s and get Ubiquiti or Edimax Pro instead.

Please Log in or Create an account to join the conversation.

More
09 Apr 2017 00:11 #88661 by alanjob
Replied by alanjob on topic Re: AP910c F/W 1.2.0 issues

WrightClick wrote: Yeah, reports aren't great from my end either. They're still having to reboot APs which is totally unacceptable. Going to raise it with my supplier on Monday and probably return the 910s and get Ubiquiti or Edimax Pro instead.



Hi, cant really say to much on here as its a DrayTek Forum :)
So far (1 day) i'm impressed with my Ubiquiti APs (even after working with Cisco gear)
I ended up running the Controller software on a Ubuntu VM. (they dont have an internal web page)
Alan

Please Log in or Create an account to join the conversation.

More
12 Apr 2017 08:35 #88677 by stu_allen
Replied by stu_allen on topic Re: AP910c F/W 1.2.0 issues

admin wrote: Apparently the issue is know in 1.2.0 and new f/w should be available soon.



Any idea of ETA? This is getting painful.

Please Log in or Create an account to join the conversation.

More
12 Apr 2017 08:43 #88678 by wrightclick
Replied by wrightclick on topic Re: AP910c F/W 1.2.0 issues
I've given up waiting. Fortunately I kept all the packaging for the 910s so my supplier is accepting a return. Ordered some Edimax Pro CAP1200 instead (identical hardware, different firmware).

I looked at Ubiquiti, but the lack of an on-board web interface put me off, as well as the fact that you can't change the management VLAN, which is a bit of an issue with this particular setup.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami