DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Note : 5G SSID Configuration only work with VigorAP800

  • bandicoot
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
06 Dec 2015 13:42 #84880 by bandicoot
We have a Draytek 2860, 2 x AP900 and 3 AP910 access points. The plan is to use central management and have this working on 2.4GHz. However there is a footnote in the 5GHz config which states:

Note : 5G SSID Configuration only work with VigorAP800 v1.1.1 and newer APM Client.

When you finish is shows 5GHz as disabled.

How do you get it to work the way you would expect?

Please Log in or Create an account to join the conversation.

More
06 Dec 2015 18:00 #84882 by piste basher
Your post prompted me to try this with my 2860n+ and single AP900. It seems to work fine, the 2860 reports the AP900 as being version 1.1.6. Both 2.4 and 5GHz bands are working. I guess that doesn't help you much, sorry.

Please Log in or Create an account to join the conversation.

  • bandicoot
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
07 Dec 2015 13:55 #84889 by bandicoot
the two AP900 are on 1.1.4 and the three AP910C are all on 1.1.3.2. router is on 3.7.4.2. trying to push out 5GHz and shows as disabled.

Please Log in or Create an account to join the conversation.

More
07 Dec 2015 14:49 #84891 by piste basher
Any reason you don't upgrade the firmwares? http://www.draytek.co.uk/support/downloads

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami