DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

AP800 Vlan issues

  • timiswright
  • Topic Author
  • Offline
  • New Member
  • New Member
More
16 Apr 2015 13:46 #83189 by timiswright
AP800 Vlan issues was created by timiswright
Hi I have 4 vlans being shared from a Vigor2830n
vlan1 on vid 10.
vlan2 on vid 20.
vlan3 on vid 30.
vlan4 on vid 40.

I am replacing my 8port smart switch and replacing it with an ap-800
I have removed the tagged ethernet from my switch and have gone into the A1 port on the ap-800
Then set up the wireless as
SSID 1 Vid 10
SSID 2 Vid 20
SSID 3 Vid 30
SSID 4 Vid 40
I then set up security on each ssid.

My issue is i can only connect to the first two SSID's if i try to connect to SSID 3 or 4 I don't receive a DHCP lease.

Has anyone got any ideas?

Thanks

Please Log in or Create an account to join the conversation.

More
16 Apr 2015 16:38 #83198 by sicon
Replied by sicon on topic Re: AP800 Vlan issues
what hand out the IP addresses for the other 2 VLANS?
I didn't think the access points could so more than 2

Please Log in or Create an account to join the conversation.

  • timiswright
  • Topic Author
  • Offline
  • New Member
  • New Member
More
16 Apr 2015 17:13 #83199 by timiswright
Replied by timiswright on topic Re: AP800 Vlan issues
The DCHP server is the 2830n as on that you can set 4 vlans.

Maybe that is the case that you cannot have 4 vlan'd ssid's it just seems strange that you have 4 ssid's.

Please Log in or Create an account to join the conversation.

More
17 Apr 2015 10:37 #83201 by voodle
Replied by voodle on topic Re: AP800 Vlan issues
Whats on the LAN > VLAN page?
Also which port is the AP800 plugged into on the 2830?

That setup should work :/

Please Log in or Create an account to join the conversation.

  • timiswright
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Apr 2015 11:15 #83205 by timiswright
Replied by timiswright on topic Re: AP800 Vlan issues
Hi, the ap800 was plugged into a to-link smart switch through a tagged cable. I have got round the issue at the minute by adding a second cable. On the main side "A" of the ap800 with two tagged ssid's and the third ssid untagged on the b side. And I'm not using the forth ssid as I couldn't get it to work with tagging. Maybe you can only us two tagged ssid's?

Please Log in or Create an account to join the conversation.

More
17 Apr 2015 16:11 #83214 by voodle
Replied by voodle on topic Re: AP800 Vlan issues
Try plugging it in directly to the router, a smart / vlan aware switch would by default have all the ports in access mode and untagged, which can result in it stripping the VLAN tags.

My question was aimed towards whether you're using port 1 on the 2830, which has a fallback option below the VLAN table, which also results in VLAN tags getting stripped from LAN port 1 if it's ticked, so untick that (make sure you still have an untagged VLAN so you don't lose access though)

also untick the enable 2 subnet feature on the ap800 when doing that

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami