DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Creating two lans on an AP800

  • nigpig
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
17 Sep 2014 09:33 #81241 by nigpig
Creating two lans on an AP800 was created by nigpig
I'm trying to get one lan set up as secure with accepted mac filter turned on for the access policy. This works fine for those devices I have in the access list.
I want to add another lan for visitors.
I have clicked the option to create 2 sub net lans on the general setup page of Wireless lans.
I have the same Lan-A selected for both and with the Isolate Lan check box ticked. Unfortunately, although it does connect it gets stuck on "obtaining IP address".
But the settings for dhcp are the same for both as they both use lan-A. This gets the ip address from the Vigor 2860 router.

Please can someone suggest where I'm going wrong?

Please Log in or Create an account to join the conversation.

  • nigpig
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
18 Sep 2014 08:49 #81243 by nigpig
Replied by nigpig on topic Re: Creating two lans on an AP800
Bump

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami