DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2860n+ Wireless Stalling

More
15 Nov 2014 14:12 #81795 by plittlemore
Replied by plittlemore on topic Re: 2860n+ Wireless Stalling

zebbedi wrote: Mine's suffering from the same issue. 3.7.4.3 made no difference. DrayTek support now want me to send in the router for investigation. I sent them screenshots of a continuous ping from multiple devices all claiming the router itself was unreachable despite having a full wireless signal. The ping also shows huge lags in response times (3 seconds+) occurring at random intervals.



Did you ever get anywhere with Draytek Support?

Please Log in or Create an account to join the conversation.

More
15 Nov 2014 14:18 #81796 by zebbedi
Replied by zebbedi on topic Re: 2860n+ Wireless Stalling
I sent it back. They couldn't find anything wrong but swapped the wireless component. It's not as good as my 2850 or 2820 but it's been a lot better since.

Please Log in or Create an account to join the conversation.

More
13 Jan 2015 13:45 #82310 by plittlemore
Replied by plittlemore on topic Re: 2860n+ Wireless Stalling
Has anyone tried v3.7.8 which appears to be available from Draytek.com?

Not sure I can put up with the effort of installing, updating the router config and then finding it has the exact same problem again.

Please Log in or Create an account to join the conversation.

More
13 Jan 2015 15:39 #82316 by admin
Replied by admin on topic Re: 2860n+ Wireless Stalling
Just to be clear, the firmware does not add 802.11ac to hardware. 802.11ac would require a new product (not yet released).

Like you wouldn't firmware to make a Vigor2860 support 802.11n if the hardware didn't ? :-)



Forum Administrator

Please Log in or Create an account to join the conversation.

More
13 Jan 2015 17:26 #82318 by faris
Replied by faris on topic Re: 2860n+ Wireless Stalling
Depends. If it is a software-defined radio and the frequencies used are supported then why not?

But anyway, I stand corrected :-) Sorry for any confusion.

Please Log in or Create an account to join the conversation.

More
29 May 2015 14:42 #83492 by joncc4
Replied by joncc4 on topic Re: 2860n+ Wireless Stalling
I am experiencing a similar problem....machines hard wired to the router work flawlessly, however wireless devices suddenly end up with the browser action wheel whirling away endlessly. Sometimes a refresh fixes, sometimes not. At best we get a couple of minutes use before it lags out again.

Is this a fault with the 2860 wifi? Have tried connecting via both 2.4 and 5ghz and am in the same room as the router with no signal contention with neighbours!

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami