DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

AP800 - memory running out, AP rebooting

  • and235100
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
23 Feb 2014 21:39 #79172 by and235100
AP800 - memory running out, AP rebooting was created by and235100
Hi.

Just noticed this today. Have had the Draytek N65 attached to a single AP 800 for a while now. (over a year)

Recently, I switched off the wireless on my Draytek 2925n - and just used the 2.4Hhz and 5Ghz bands from the AP800. (Simultaneous)

Now - I noticed that every couple of hours, the AP restarts - it runs out of available memory from the look of the System Status page.

I did try the RC 1.1.3 firmware available from the draytek.com website - but have reverted back to 1.1.1 as it seems to give me longer than two hours before a restart. (I haven't confirmed this as of yet - time allowing - could just be an issue with the 1.1.3 firmware)

Any ideas? I have only noticed this since using the 2.4Ghz and 5Ghz bands simultaneously on this AP - I had no such problem when I used the 2925n on the 2.4Ghz band, and the AP800 on the 5Ghz only.

I tried a factory reset - and put all my settings back in again - no difference it seems.

TIA.
Andrew.

Please Log in or Create an account to join the conversation.

  • and235100
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
23 Feb 2014 21:53 #79173 by and235100
Replied by and235100 on topic Re: AP800 - memory running out, AP rebooting
Seems to be the 1.1.3 firmware. Memory usage on the AP800 seems to be stable using the UK release 1.1.1 firmware.

Thanks anyway.

Please Log in or Create an account to join the conversation.

More
28 Mar 2014 19:43 #79497 by babis3g
Replied by babis3g on topic Re: AP800 - memory running out, AP rebooting
there is a new 1.1.4 firmware, have not tried yet

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami