DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Guest networking

More
28 Nov 2013 10:08 #78381 by chasw
Guest networking was created by chasw
There seem to be many people on the internet with this problem, but so far I have not found any solutions!

I have a Vigor AP 800 connected to a BT homehub 3 modem (with wireless disabled). In addition to full network access, I want also to allow internet access only to "guests", with my ethernet connected PC and NAS drive inaccessible. I can easily set up a new guest SSID, but if I put this on LAN-B, I cannot see the BT homehub modem, and hence cannot see the internet. Similarly, if I put the guest SSID on LAN-A, and disable access to ethernet wired PCs, again I am unable to see the modem.

Another option might be to enable the homehub wireless, but I can't see how to make this "internet only" access.

Any help would be gratefully received!

Please Log in or Create an account to join the conversation.

More
28 Nov 2013 10:18 #78382 by sicon
Replied by sicon on topic Re: Guest networking
I think you will find that unless you have a VLAN aware router the LAN B is for use when you have to separate networks - ie 2 different gateways.

Does the hone hub supports 802.1dq VLAN tags?
If it does disable 2nd subnet feature on the AP800 and use the tags.

Please Log in or Create an account to join the conversation.

More
28 Nov 2013 10:34 #78383 by chasw
Replied by chasw on topic Re: Guest networking
The BT homehub does not appear to support VLAN tagging unfortunately.

Looks like I am stuck!

Thank you for your help.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami