DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

DMZ AP700

  • richardtea
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Jul 2013 12:09 #76967 by richardtea
DMZ AP700 was created by richardtea
Hi All,

I would like to setup a guest wifi access using DMZ, as the access point is at the other end of a fibre line to my 2850 router. I don't think I can put the normal traffic and the guest wifi down the same fibre line, so think DMZ would be the preferred option.

Questions

1. Can the AP700 be used as a true DMZ host if so do I need to set it as a static ip on my subnet, or a guest subnet ( prefeered ), or will it need to get its address via dhcp from the 2850. ( lots more than 1 question there :) )

2.Can I use the DHCP from the AP700 for allocation of address to guests.

Hope somebody can help, as my knowlwdge on DMZ's is pretty poor.

Many thanks in advance

Richard

Please Log in or Create an account to join the conversation.

More
15 Jul 2013 18:49 #76973 by voodle
Replied by voodle on topic Re: DMZ AP700
This is how you should do it:
http://www.draytek.com/index.php?option=com_k2&view=item&id=2649

It's the same with the AP700 but you have to click the multiple SSID button to get the page for additional SSIDs where you can enter one with a VLAN tag :)

Please Log in or Create an account to join the conversation.

  • richardtea
  • Topic Author
  • Offline
  • New Member
  • New Member
More
16 Jul 2013 13:43 #76985 by richardtea
Replied by richardtea on topic Re: DMZ AP700
That look fine,

Please Log in or Create an account to join the conversation.

  • richardtea
  • Topic Author
  • Offline
  • New Member
  • New Member
More
22 Jul 2013 14:34 #77051 by richardtea
Replied by richardtea on topic Re: DMZ AP700
Does anyone know if the VLAN will work over normal switches?

Kind Regards

Richard

Please Log in or Create an account to join the conversation.

More
23 Jul 2013 15:50 #77062 by sicon
Replied by sicon on topic Re: DMZ AP700

RichardTea wrote: Does anyone know if the VLAN will work over normal switches?

Kind Regards

Richard



Switch need to be VLAN 802.1Q aware to recognise the tags

Please Log in or Create an account to join the conversation.

More
25 Jul 2013 10:15 #77084 by voodle
Replied by voodle on topic Re: DMZ AP700
a basic switch will just pass through the VLAN tags though, so probably better to use that if you just want to use a normal network with the access point providing a guest network.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami