DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

AP800 stalling

More
06 Mar 2013 13:40 #75467 by davidlee
AP800 stalling was created by davidlee
Hello,

I have an AP800 that seems to have 20-30 second stalling fits.

It seems everything is fine for about 2 hours and then it will start to not allow me to connect to the internet for 20-30 seconds.

I am on my second unit now running firmware dratek put on there when replaced under warranty: 1.0.5RC3

While it was away for repair I used a BT Home Hub as a wireless AP (turning off DHCP, etc...) with the same SSID, channel and security settings and it was flawless.

I am very disappointed in the AP800, I was about to order 5 more but think I will hold off now.

Anyone else having trouble or is it just me?

Many thanks,

David Lee

Please Log in or Create an account to join the conversation.

More
06 Mar 2013 15:01 #75482 by davidlee
Replied by davidlee on topic Re: AP800 stalling
Seems that when it stalls I can access LAN servers but not the LAN gateway which is a Vigor3300 and the internet.

It is like the Vigor3300 is blocking anything on the AP800.

The rest of the network is fine and the other access point I was using also works fine with the same network port and settings.

Please Log in or Create an account to join the conversation.

More
10 Oct 2013 11:24 #77924 by rickblackdog
Replied by rickblackdog on topic Re: AP800 stalling
Identical issue for me. Think it's a fault with all AP800's because I have 4 of them and they ALL do this.

Please Log in or Create an account to join the conversation.

More
10 Oct 2013 11:28 #77926 by davidlee
Replied by davidlee on topic Re: AP800 stalling
So only have trouble with the Vigor3300 or other routers too?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami