DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

VigorAP 800 + RADIUS

  • andre77
  • Topic Author
  • Offline
  • New Member
  • New Member
More
22 Jan 2013 20:12 #74896 by andre77
VigorAP 800 + RADIUS was created by andre77
Trying to configure VigorAP 800 to do 802.1x authentication.

Operation Mode : AP
General setup: 2 SSIDs - 802.11 b+g+n
first SSID configured as Mixed(WPA+WPA2)/PSK - works fine
2nd SSID configured as Mixed(WPA+WPA2)/802.1x, TKIP/AES, using the internal RADIUS server (I first tried with a Windows Server but the AP wouldn't even send packets to the server). Clients (Windows 7) see the SSID as WPA2 entreprise but fail to connect (don't even prompt for a password).

- Should it work without any manual setting on Windows 7 client side?
- Is there any limitation in using 802.1x on a second SSID? Or other limitation when using RADIUS?

Thanks
AT

Please Log in or Create an account to join the conversation.

More
11 Mar 2013 12:18 #75532 by ecl6mcj
Replied by ecl6mcj on topic Re: VigorAP 800 + RADIUS
I have exactly the same problem. If encryption on ssid2 is set to 802.1x/WEP the client gets a request for username/password (which always fails) repeatedly. Using any other 802.1x encryption produces no response at all.
I cannot find any evidence of anyone getting the internal Radius server to work, but many hours of frustration getting nowhere. No-one from Draytek seems interested in this problem.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami