DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Setting up WDS between Vigor 2820n and Speedtouch 716wl

  • diatomdeb
  • Topic Author
  • Offline
  • New Member
  • New Member
More
07 Jan 2011 19:12 #65524 by diatomdeb
Hoping a knowledgeable person might have a genius answer to this one...

I am trying to set up a WDS in my home to increase the range of my
wireless connection indoors. The two routers can see each other and be
seen by my devices but the router not connected to the DSL line does not
wirelessly rebroadcast the 'internet connection' from the router that is
connected.

The setup is as follows:

Downstairs: Draytek 2820n wireless router connected to DSL line.

Upstairs: Speedtouch 716wl wireless router. I want to be able use this
router as a repeater/bridge to increase the range of the wireless signal
upstairs from the DrayTek downstairs.

Both routers support WDS mode.
Each router can see the other in their list of access points.
Each router's wireless signal can be seen and connected to by my wireless clients.
However, when connected to the Speedtouch upstairs, they can't get onto the internet, only the LAN.
Both routers use the same channel and have WEP security set up using the same key.
The firewall of the Speedtouch router is turned off.
The Draytek is set to 'repeater' in its WDS settings and lists the MAC
address of the Speedtouch in its list of access points.
The Speedtouch is set to recognise the Draytek's MAC address as an
access point in its WDS settings.

Problem: the Speedtouch router appears to connect to the Draytek
and clients can connect on the LAN but can't get online (WAN).

What else can I try to get this working? Why is the broadband signal not
being rebroadcast by the Draytek - or why is the Speedtouch not
rebroadcasting it? Is it not capable of this, possibly, despite having
WDS capability - can it transmit but not broadcast??

Debbie.

Please Log in or Create an account to join the conversation.

More
10 Jan 2011 09:48 #65546 by howard simpson
Replied by howard simpson on topic Setting up WDS between Vigor 2820n and Speedtouch 716wl
To make WDS work on a 2820n you need to use WPA2 security if you are using N mode. I am not familiar with the speed touch as to whether its N or G wireless but if its G only then you should be able to use WEP. The other thing to try is the advanced wirless settings, I suspect it is more likely to work in mixed mode and a channel bandwidth of 20.

Howard

Please Log in or Create an account to join the conversation.

  • diatomdeb
  • Topic Author
  • Offline
  • New Member
  • New Member
More
10 Jan 2011 11:48 #65552 by diatomdeb
Thanks Howard. The Speedtouch does not support N so I am using both in b/g mode with WEP security. In fact the solution to the problem was to disable DHCP on the Speedtouch and it is now all working perfectly!

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami