DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Use the 2820n as a acess point

More
26 Mar 2010 09:53 #61376 by jbason
Use the 2820n as a acess point was created by jbason
Can I use my 2820s as a access point only? If so what settings do I need to change to do this.

Please Log in or Create an account to join the conversation.

More
06 Apr 2010 16:39 #61566 by jbason
Replied by jbason on topic Use the 2820n as a acess point
I have this working expect for 1 problem.

I need the wireless clients to get an ip from a windows server but I can't, have tried switch off the 2820 dhcp server and that didn't work and also put the windows server's ip in for a dhcp relay.

I was thinking about running the dhcp server on the 2820 just for a few address but then I would have 2 dhcp server on my network so how would LAN pc's know which to use?

Please Log in or Create an account to join the conversation.

More
19 Apr 2010 10:38 #61718 by plandregan
Replied by plandregan on topic Use the 2820n as a acess point
Having 2 DHCP's isnt too much of a hastle. Which ever one respons 1st will answer the request. Just have then in 2 seperate zones of the same Subnet.

Eg. 192.168.1.1 - 192.168.1.49
then 192.168.1.50 - 192.168.1.99

Gives 2 groups of 50 on the same subnet. No problems there.

Also try to manually assign an IP to a wifi client. Can they ping a wired one?? If not there is a conectivity issue between the Wifi AP and inbuilt switch. Check for VPN configs in there.

Please Log in or Create an account to join the conversation.

More
26 Apr 2010 11:13 #61779 by jbason
Replied by jbason on topic Use the 2820n as a acess point
The static address works, that is what I have been doing. It just means laptop uses can't just come and use the wireless network.

Would wired client get a dhcp address from the ap do you think?

Please Log in or Create an account to join the conversation.

More
27 Apr 2010 09:26 #61790 by voodle
Replied by voodle on topic Use the 2820n as a acess point
You would need to change the gateway address to match the other router though if you use the DHCP server on the 2820

Please Log in or Create an account to join the conversation.

More
27 Apr 2010 16:27 #61801 by jbason
Replied by jbason on topic Use the 2820n as a acess point
I setup the dhcp server on the draytek but my sbs 2003 server did not like it. I have this server message and the dhcp service on the server has shut itself down.

The DHCP/BINL service on this computer running Windows Server 2003 for Small Business Server has encountered another server on this network with IP Address, 192.168.1.254, belonging to the domain

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami