DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820N Wireless

  • chris.wright@uk.dsv.com
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Nov 2009 09:31 #58869 by chris.wright@uk.dsv.com
2820N Wireless was created by chris.wright@uk.dsv.com
I can only get 3 devices connected via wireless, IP address pool set to 20, I can see that 5 IP's have been allcoated but the 4th device cannot connect to the internet, it does not matter which order I connect the devices always the 4th fails to get internet connection. Anybody else had this problem.

Please Log in or Create an account to join the conversation.

More
04 Dec 2009 13:17 #59192 by thatphilbrettguy
Replied by thatphilbrettguy on topic 2820N Wireless
Yup. I've got a ION board with built in N and that passes WPA2, gets IP address then gets no other data. Set the router to G only and it works. Something in the N firmware then it seems.

Please Log in or Create an account to join the conversation.

  • chris.wright@uk.dsv.com
  • Topic Author
  • Offline
  • New Member
  • New Member
More
04 Dec 2009 13:37 #59194 by chris.wright@uk.dsv.com
Replied by chris.wright@uk.dsv.com on topic 2820N Wireless
Thanks I'll try that

Please Log in or Create an account to join the conversation.

More
09 Apr 2010 21:26 #61606 by mcgookin
Replied by mcgookin on topic Same Problem
I couldn't see the 2820n at all from either an (HTC) O2 XDA Guide or an HTC hero with N enabled, works fine in B+G mode.

Thanks for the pointer...

Hoping this may also stop my laptops not being able to reconnect wirelessly at intermittent intervals unless I reboot the router.

No problems connecting to Draytek 2600vg and Linksys access points.

Any suggestions for a fix Draytek without having to disable N?

Please Log in or Create an account to join the conversation.

More
19 Jul 2010 18:32 #62929 by mcgookin
Replied by mcgookin on topic Support?
Anyone figured out a better fix for getting 802.11g and n to work at the same time?
Just got an xbox with 802.11n, sure enough tried enabling g+n on the router and the G clients start having problems again!

Still happens having tried upgrading firmware to 3.3.4_232201!

Number of different clients all fail- broadcom, htc, intel...

Please Log in or Create an account to join the conversation.

More
03 Aug 2010 15:17 #63122 by tivoli
Replied by tivoli on topic 2820N Wireless
It's annoying, wish Draytek would pull their finger out and fix it!

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami