I need to have my remote client (10.0.10.0/24) assigned or passed through to an IP address from the HQ LAN subnet (192.168.1.0/24).

HQ does not have a DHCP server behind the 2862 router. Both sites have Vigor 2862 at current firmware and IPSEC/Lan to LAN VPN is established. I can access the HQ dashboard & ping devices on HQ lan and
also 3 subnets. Is there a way to set up the routers to achieve the above request as I can't see a way with my basic knowledge. I don't want to put a server behind the router as this is a one off exercise to avoid a long round trip! I also don't want to disable my access to the HQ (actually rental apartments) router with bad config etc.

thanks for any guidance

johnsc wrote:
I need to have my remote client (10.0.10.0/24) assigned or passed through to an IP address from the HQ LAN subnet (192.168.1.0/24).

You want to have an IP address from the Remote LAN - is that what you're saying :?:

If so, the only way I can think of achieving that, is to configure a "Remote Dial-in User" @ HQ and use VPN client software to establish a direct link to it. It won't be exactly the same as being on the LAN, since broadcast-based software won't work.

But I may have misunderstood the question, all together...