DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Lan to Lan VPN connected but can't ping any remote hosts

  • soultruth
  • Topic Author
  • Offline
  • New Member
  • New Member
More
09 Jul 2018 22:28 #92292 by soultruth
Hi there,

New to forum, hoping I can get a helping hand here :)

We have two Vigor routers, one at each site. I need a VPN to allow both sites access to the hosts at either end.

I've gone ahead and followed the Dreytek Lan to Lan VPN video tutorial and the VPN connected. When I tried to ping the remote server ip address (site 1 VPN server 192.168.10.1) I get nothing. Same the other way (Site 2 VON dial out 192.168.1.1). I suspect routing. There is a second WAN connection. I'm not very well versed in how this was set up (another contractor) but it gets a DHCP address on WAN2, its 192.168.1.63. So could this be a problem for the VPN traffic? It's odd how pings fail the other way though, so from site B to site A.

Any pointers, help or general suggestions most welcome!

Thanks in advance.

R

sp - here is the routing table from site A (vpn server)

Key Destination Gateway Interface


* 0.0.0.0/ 0.0.0.0 via wan ip WAN1
S my wan ip/ 255.255.255.255 via same WAN1
* another wan ip/ 255.255.255.255 via same WAN1
C~ 192.168.10.0/ 255.255.255.0 directly connected LAN1
* 192.168.1.63/ 255.255.255.255 via 192.168.1.63 WAN2
C 192.168.1.0/ 255.255.255.0 directly connected WAN2

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami