DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

IKEv2

More
12 Nov 2017 11:12 #90012 by ccarmock
Replied by ccarmock on topic Re: IKEv2
Yes I have but I was responding to a question here, so it was valid to respond here.

Please Log in or Create an account to join the conversation.

More
12 Nov 2017 15:21 #90014 by admin
Replied by admin on topic Re: IKEv2
Okay then, fair enough :-) Just wanted to make sure !

Forum Administrator

Please Log in or Create an account to join the conversation.

More
13 Nov 2017 23:02 #90018 by ccarmock
Replied by ccarmock on topic Re: IKEv2
Support have asked for the two config files to replicate my issue in the lab, so have sent those.
Also they have asked me to try a release of 3.8.5.1 on the 2860, which I have, but that exhibits the same issue with IKEv2 ie dropping every few seconds. Will update here as things progress in the hope it helps anyone else experiencing similar issues.

Please Log in or Create an account to join the conversation.

More
17 Nov 2017 17:27 #90037 by admin
Replied by admin on topic Re: IKEv2

ccarmock wrote: Will update here as things progress in the hope it helps anyone else experiencing similar issues.



Thank you.

Forum Administrator

Please Log in or Create an account to join the conversation.

More
24 Nov 2017 22:13 #90066 by ccarmock
Replied by ccarmock on topic Re: IKEv2
Draytek support sent me firmware 1.3.2 for the 2960 to try to see if that would help with stability - unfortunately not.

Please Log in or Create an account to join the conversation.

More
30 Jan 2018 23:42 #90600 by ccarmock
Replied by ccarmock on topic Re: IKEv2
Finally have the fix - disabled auto dial out on the 2960 and then an IKEv2 VPN will stay up between the 2960 and 2860ac

Please Log in or Create an account to join the conversation.

Moderators: Sami