Hi,
i have 2 draytek 2860 routers set up with an ipsec VPN running between them.
the issue i have is the routers can see each other okay but anything past the router fails. each router has 2 vlans running on it router 1 has a 10.6.1.1 and 33.1.1.1 and the second router has 192.168.1.1 and 192.168.2.1
the subnets i am working with:
router 1
33.1.1.1
router 2
192.168.2.1
vpn is up and working. if i run a tracert from router 1 or a pc on that network to a pc on router 2 it goes to the 192.168.1.1 subnet then fails
the same is for the reverse if i use a host or the router on 192.168.2.x network and try to tracert to a pc on the 33.1.1.x network it goes to the 10.6.1.1 address and fails.
i have confirmed the correct addresses are in the VPN config, i have disabled the firewall on the router and the machines, i have confirmed icmp echo requests are allowed. im not sure whats going wrong here i have read all the support guides and triple checked my config. all is correct so im at a loss here.
Any help much appreciated.
Cheers
