DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Multple Subnets in VPN 3900 -> 2860

  • acolville
  • Topic Author
  • Offline
  • New Member
  • New Member
More
11 Jul 2016 13:14 #86462 by acolville
Multple Subnets in VPN 3900 -> 2860 was created by acolville
I have setup loadbalancing VPN's between 3900 -> 2860

3900: 192.168.3.0 (PRIMARY) AND 192.168.6.0 (ADDITONAL)
2860: 192.168.2.0 (primary) and 192.168.7.0 (additional)

SIngle VPN setup, without GRE and all works ie can ping both subnets at opposite end of the trunk from each end.

With GRE and load balance, Can only ping from primary to primary

Routing tables look OK...

3900
10 192.168.7.0 (Gateway IP) 255.255.255.0 UG 0 wan-wan2

2860
S~ 192.168.3.0/ 255.255.255.0 via [GW Address] VPN-3
S~ 192.168.6.0/ 255.255.255.0 via [GW Address] VPN-3

Do I need two tunnels, and if so how do I set that up at the 2860 end??

THanks for any help/advice!

Alistair

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami