DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

IPSEC VPN but 0 RX

  • bodgeup
  • Topic Author
  • Offline
  • New Member
  • New Member
More
09 Nov 2015 20:48 #84707 by bodgeup
IPSEC VPN but 0 RX was created by bodgeup
I have set up an IPSEC LAN to LAN Tunnel, it connects OK and I have got the Local & Remote network IP's right. But on the office side the RX is 0 but TX is fine, where as the offsite shows RX & TX. Why would this be happening? Obviously I cannot ping either remote network because of this.

Just so you know I did have the Offsite connected to a Sophos UTM but it seemed to be interfering with certain traffic, so I connected the 2925 to the offsite router directly and assigned its WAN a static IP. The reason I mention this is because the VPN worked then to but I was able to ping both remote networks, its since moving the WAN to the Router the trouble started. I cant see why as I didnt change the VPN settings. I have tried reversing the VPN so the offsite dials out but its always the same.

Any ideas?

Thanks

JK

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami