DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

L2tp ove IPSEC pass through on 2830

  • graemecarstairs
  • Topic Author
  • Offline
  • New Member
  • New Member
More
26 Nov 2012 09:19 #74342 by graemecarstairs
L2tp ove IPSEC pass through on 2830 was created by graemecarstairs
HI There,

Can someone help me with enabling l2TP over IPSEC pass thruogh on the Vigor 2830 series.

I have setup the NAT rules for the TCP/UDP ports, but I cannot connect via l2tp, the PPTP pass through works, but we need to enable l2tp

any suggestions?

Thanks

Graeme

Please Log in or Create an account to join the conversation.

More
27 Nov 2012 15:33 #74358 by asimm.it
Replied by asimm.it on topic Re: L2tp ove IPSEC pass through on 2830
Hi Graeme,

May sound like a daft question but have you enabled L2TP VPN service to allow pass through?

Check settings under VPN and Remote Access then Remote Access Control under the web administration.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami